Franke FOOD WASTE DISPOSER Owner's Manual

Page of 8

Download

Print this page

Bookmark us

FOOD WASTE DISPOSER OWNER'S GUIDE

IMPORTANT - Read all instructions thoroughly.

Keep this guide for future reference.

CAUTION - Be sure to review SAFETY INSTRUCTIONS PERTAINING TO A RISK OF

FIRE, ELECTRICAL SHOCK OR INJURY TO PERSONS before installing disposer.

Our food waste disposer is a reliable appliance that will

offer your household many years of trouble free use. This

disposer has been uniquely designed to free your kitchen of

all organic food waste left over after the preparation and

clean-up of meals. Simply turn on the water, switch the

disposer on, put your food waste in the disposer and it will

shred the garbage into very fine particles that are easily

flushed through the sewer system without any problem. For

Batch Feed Operations, please see Section 6 of this manual.

Before installing and operating this disposer:

1. Make sure that the installation of this appliance is

allowed by the authorities.

2. Please read and follow all recommendations in this

manual to ensure trouble free operations.

If you have any questions, please contact your

retailer.

MOUNTING ASSEMBLY

ELECTRICAL CONNECTIONS

OVERFLOW/APPLIANCE CONNECTIONS

ATTACHING THE DISCHARGE ELBOW

CONNECTING DISPOSER TO MOUNT ASSEMBLY

OPERATING INSTRUCTIONS

TROUBLESHOOTING

CLEANING AND MAINTENANCE

ELECTRICAL INFORMATION

Table of contents

B E A B

A p p r o v e d

www.franke.co.uk

FR020627 OWNERS GUIDE 16/5/06 4:38 pm Page 1

1 2 3 4 5 6 7 Next › »

Summary of FOOD WASTE DISPOSER

Page 1
Food waste disposer owner's guide important - read all instructions thoroughly. Keep this guide for future reference. Caution - be sure to review safety instructions pertaining to a risk of fire, electrical shock or injury to persons before installing disposer. Our food waste disposer is a reliable ...
Page 2
Important safety instructions instructions pertaining to risk of fire, electric shock or injury to persons. Save these instructions. 1. Read all instructions before using the appliance. 2. To reduce the risk of injury, close supervision is necessary when an appliance is used near children. 3. Do not...
Page 3
1. Components and installation of mount assembly please read before installation nb: pay close attention to the order of mount assembly parts, as they have been correctly assembled by the factory. (see 1a and 1b.) a. Disassemble the mounting assembly, as it has been shipped, by turning the sink flan...
Page 4
2. Electrical supply this disposer is rated at 220–240v~, 50/60 hz and should be connected to a main distribution board or consumer unit. Always use a qualified electrician for all installations. For models with provided pre-wired moulded plug and lead (see 2a) this disposer is designed to be connec...
Page 5
3. Overflow/appliance connections 4b for overflow or dishwasher connection complete the following procedure. Alternatively go to step 4. A. Using a blunt instrument (steel punch or wooden dowel), knock out entire plug (see 3a). Do not use a screwdriver or sharp instrument. When knockout plug falls i...
Page 6
6. Operating instructions this disposer utilises anti-jam swivel impellers that make a clicking sound as they swing into place. This indicates normal operation. Continuous feed models: a. Remove sink stopper. Turn on cold water using a medium flow. B. Turn switch to on position; your motor is turnin...
Page 7
1. Be sure disposer is empty before using other appliances attached so it may drain properly. 2. You may want to leave the stopper in the drain when not in use to prevent utensils and foreign objects from falling into the disposer. 3. Use it wisely! Your disposer is ruggedly built to give you years ...
Page 8
8. Cleaning and maintenance the motor is permanently lubricated for life. Do not attempt to lubricate your disposer! The disposer is self cleaning and scours itself with each use. Your disposer, except for the batch feed model, is equipped with a removable splash guard for ease of cleaning or replac...