Franklin Chef FCC7000 Instruction Manual - Location of Controls
Location of Controls
Installation
1. After you have removed the toaster from the carton, inspect the unit for signs
of damage. If there is damage, do not use the unit. Contact your authorized
dealer.
2. Verify that all parts have been received. If there is a protective coating on
the unit, remove it.
3. Attach the four legs to the toaster by screwing in each leg. These legs can
be adjusted to level the toaster.
4. Install the toast tray by inserting its two tabs into
the slots at the front of the slide plate The toast
tray has two side slots that fit over the mount pins
near the front of the chamber. (See photo at right.)
5. Insert feed rack into top of crumb tray/reflector. Study the illustrations below
to see the right and wrong ways to do this.
4
Feed rack
Power switch
Heat Setting
dial
Toast Color
dial
Crumb tray/
Reflector
Conveyor chain
Slide plate
Toast tray
Leg (1 of 4)
WRONG
WRONG
CORRECT