Franklin Wireless S600C User Manual - page 5
of
5
5
Figure -4 Port definition of RF connectors
IV. Installation of the S600C
z
Connect the devices and set up the test environment according to Figure-2. Then connect the
S600C to the PC through a Micro-USB to Type A USB cable..
z
When performing the wired connection test, connect the E5515C to the RF interface of the
S600C.. (For the connection method, see Figure-2)
z
When performing the wireless connection test, connect the antennas to the RF interface of the
S600C directly. (For the connection method, see Figure-3.)
V. LED indication of the S600C
Green: H/W power indication
Blue: Indicate the state of the card.(M600C)
VI. Material List
Model Device
USB
Y-Cable
CDMA
Main
antenna
CDMA
Aux/GPS
antenna
S600C
1 EA
1 EA
1 EA
1 EA