Ta-1h/tri avatar multi-dimensional chorus owner’s manual ver 1.0
•three independent pitch-modulation signal paths and one dry signal path for mixing in the analog domain. •a widening effect characteristic of three-phase choruses is attained by 120˚ shifting of the phase in each signal modulation path. •supports both stereo and monaural operation. In monaural oper...
4 5 1 controls and indicators: front panel 2 controls and indicators: rear panel ⑫ ⑬ ⑭ ⑮ ⑯ ⑰ ⑤ ⑪ ⑩ ⑥ ⑦ ⑧ ⑨ ④ ③ ① ② ① effect on/off footswitch turns on/off the chorus effect. When on, the led above the switch illuminates. ② select footswitch •in preset mode: switches presets 1–4 cyclically, i.E., pre...
6 7 the tri avatar has three operating modes: manual, preset, and edit. Manual and preset modes are toggled by pressing the mode switch. Edit mode is activated by the edit switch. In edit mode you can modify preset contents and save them in a preset memory. The tri avatar has four chorus sounds as f...
8 9 5 exp terminal settings 6 midi channel settings midi signal receiving channels are set by following the procedures below. ＜setup procedures＞ •turn on the power to the unit while holding down the select footswitch. •hold the footswitch down until both the preset and manual leds illuminate. Releas...
10 11 8 about midi 9 specifications & ratings the tri avatar can switch presets or modify all of the parameters via external midi signals. A midi signal is assigned to each function as shown in the table below. When the tri avatar’s preset is recalled by a midi program change number, the unit operat...
