FREECALL ipcall-200 User Manual - 5. Appendix
12
1. The System Config in this phone is not allowed to access if you do not have
permit. It is protected by the password.
2. Even you are allowed to access into user’s config menu, but if the Phone display
correctly with the current time, that means there is no need to access the Menu
which may occurred a problem by an improper operation.
Important: Don’t try
to change anything in case pressing the MENU attempt to modify any
existing parameter. You can ignore a change by hang up and off with
handset.
5. Appendix
5.1. Specification
5.1.1. Device specification
Item
Details
AC
Adapter(Input/Output)
Input:100-240VAC 50-60Hz Output:DC 5V/1A
WAN
10/100Base- T RJ-45 for LAN from Router/ ADSL Modem
Port
LAN
10/100Base- T RJ-45 for PC Extension
Power Consumption
Idle:1.5W/Active:1.8W
LCD size
74 x 28mm dot-matrix LCD
Operation Temperature
0~40℃
Relative Humidity
10~65%
Main Chipset
BCM 1190
SDRAM
16Mbits
Flash
4Mbits
Size(W x H x D)
11.6×8×3 in.(295×205×75mm)
Weight
2.07lb.(0.94kg)
5.1.2. Voice Features
l Echo cancellation
l Supports full duplex.
l Storage for phonebook, outgoing calls / missing calls / Incoming calls up to 500
records. 100 records of each band.
l Options for 12/24 time format.
l All Calls with time stamp
5.1.3. Network Features
l WAN/LAN: Support Bridge and Router mode.