Freeflow Spas Azure Owner's Manual

Other manuals for Azure: Instructions Manual
Manual is about: Fusion Series Spa

Summary of Azure

  • Page 1

    The perfect choice www.Freeflowspas.Com owner’s manual december 1, 2009 fusion series tropic azure tristar opal caution do not operate spa before reading this manual failure to read this manual & follow its instructions may result in unsafe operation and or permanent damage to your portable spa..

  • Page 2

    Table of contents introduction title page 1. Table of contents 2 2. Owners record 3 3. Planning a location 4 4. A good foundation 5 placing the hot tub 5. Important safety instructions 6 6. Safety precautions 7 7. Electrical requirements 8 8. Controller reference guide 9 9. Feature operations 10 10....

  • Page 3

    3 the perfect choice owners record locating the fusion hot tub serial number: label is located on the lower right side of the equipment access panel. You will need the spa model and serial number to properly register your spa and activate coverage. Date purchased: purchased from: phone: telephone: s...

  • Page 4

    4 planning a location for your fusion hot tubs consider these things when determining where to place your hot tub. Safety first: do not place the hot tub within 10 feet (3m) of overhead power lines. Make sure your hot tub is positioned so access to the equipment compartment and side panels will not ...

  • Page 5

    5 is always best to design special installations so the hot tub can still be moved, or lifted from the ground. A good foundation your new hot tub needs a good solid foundation. The area your hot tub sits on must be able to support the tub, the water in it and those who use it. If the foundation is i...

  • Page 6

    Special circumstances the use of a crane for delivery and installation is primarily to avoid injury to your hot tub, your property or to delivery personnel. Our customer service may be able to assist you with the arrangements. Cranes are not considered “normal delivery”. Important safety instruction...

  • Page 7

    7.

  • Page 8: Safety Precautions

    Safety precautions danger – risk of injury – read and follow all insturctions b.Since excessive water temperatures have a highpotential for causing fetal damage during the early months of pregnancy, pregnant or possibly pregnant women should limit spa water temperatures to 1. Read, keep, and make th...

  • Page 9: Electric Requirements

    Electric requirements do not plug in your hot tub without filling with water danger – risk of electric shock installations that do not conform to the following procedures and requirements may expose users to electric shock. Non-conforming installations will not be covered under warranty. Your electr...

  • Page 10

    Controller reference guide hydro friction system fusion hot tubs initial start-up your topside control has been specifically designed so that by simply connecting the spa to its properly grounded source, the control will automatically heat the water to the set temperature. Temperature adjustment (60...

  • Page 11: Air Control Valve

    11 feature operations air control valve the air control valve serves to regulate the amount of air mixed with the water when the jets are operational. Rotate the air control in one direction to achieve the maximum jet pressure and therapeutic action. Rotating the air control in the opposite directio...

  • Page 12: Applying Power

    12 fill up and start instructions the following procedures should be followed on initial startup and whenever the hot tub is drained for routine maintenance. Filling the hot tub with water 1. Clear all the debris from your hot tub. 2. Use a garden hose to fill your hot tub with water. Note: do not u...

  • Page 13

    Adding start-up chemicals you should have an adequate supply of chemicals on hand for your hot tub. You should familiarize yourself with the necessary types and amounts of chemicals to maintain your water & keep it at clean and healthy levels. You can purchase these chemicals from your dealer. Note:...

  • Page 14

    Cleaning or winterizing every three to six months, depending upon the water condition, you may need to renew your water. Caution: read this before draining your hot tub to prevent damage to the hot tub’s components, unplug the spa from the outlet before draining the hot tub. Do not plug your spa bac...

  • Page 15: Filter Cartridge Maintenance

    Spa maintenance filter cartridge maintenance fusion hot tubs uses a screw in filter cartridge that is easily removed. When the filter cartridge is removed, make sure no objects fall into the filter cavity. They can cause obstructions to the water movement. Every two weeks, the filter cartridge must ...

  • Page 16: Cover Care

    Cover care please keep your cover free from dirt at all times. Use a cover cleaner or a warm mild soapy water to clean the surface. Do not use any silicone-based products, as it will dry and may eventually crack the vinyl. Note: do not stand on the cover at any time. Remove the cover when adding che...

  • Page 17

    17 troubleshooting guide why does my spa run all the time? Your hot tub is designed to run from the time you plug it in until it reaches the set temperature. It cannot be turned off until the set temperature is reached. After the set temperature is achieved, your hot tub will only turn on during fil...

  • Page 18

    18 fusion hot tubs limited warranty fusion hot tubs is manufactured by freeflow products incorporated, ontario, ca. Five-year shell/surface warranty freeflow products, inc. Offers a shell warranty on manufacturing defects resulting in water loss for a period of five yearsfrom the date of purchase. A...

  • Page 19

    19.