Summary of DevCon-Center
Page 1
G&d devcon-center installation guide.
Page 2
I · g&d devcon-center about this guide this guide is authored with special diligence and verified by the state of the art for correctness. G&d neither explicitly nor implicitly takes guarantee or responsibility for the qual- ity, efficiency and marketability of the product when used for a certain pu...
Page 3
Contents g&d devcon-center · ii contents safety guidelines ............................................................................................... 1 the »devcon-center« appliance ...................................................................... 2 scope of delivery .........................
Page 4
Safety guidelines 1 · g&d devcon-center safety guidelines please read the following safety guidelines attentively before you start running the g&d product. The guidelines help to avoid damage to the product and prevent pos- sible injuries. Inform all persons that use this equipment in detail about t...
Page 5
The »devcon-center« appliance g&d devcon-center · 2 the »devcon-center« appliance the config panel web application is integrated into various g&d devices. It provides the graphical user interface to configure and monitor the devices. Adding an devcon-center appliance to the existing g&d devices (wit...
Page 6
Installation 3 · g&d devcon-center installation establishing a connection to up to two local networks network a: insert a category 5 twisted pair cable (or better). Network b: if you want to integrate the devcon-center appliance into another network, insert the category 5 (or better) cable into this...
Page 7
Initial configuration of the network settings g&d devcon-center · 4 initial configuration of the network settings in order to access the web application, the network settings of the devcon-center appliance on which the web application is operated are to be configured. The following table lists the d...
Page 8
Initial configuration of the network settings 5 · g&d devcon-center 8. Use the paragraphs interface a and/or interface b to enter the following data: 9. Enter the following data in the section global network settings : 10.Click ok to save your data. 11.Click the logout symbol (see figure on the righ...
Page 9
Adjusting a common database for all devices g&d devcon-center · 6 adjusting a common database for all devices in order to being able to use the web application of the devcon-center appliance to administer, configure and monitor all devices of the kvm system, the databse set- tings of the different d...
Page 10
Using the reset button 7 · g&d devcon-center using the reset button the reset button is located between the identification led and the rs 485 interface on the front panel of the computer module and the user module. This button enables you to reset the default settings as well as to temporarily deact...
Page 11
Using the reset button g&d devcon-center · 8 temporarily deactivating the netfilter rules in the default status of the devcon-center appliance, all network computers have access to the extender’s ip address (open system access). The web application enables you to create netfilter rules to control th...
Page 12
Status displays 9 · g&d devcon-center status displays various status leds enable you to control the devcon-center ’s current operating status. The following table lists all possible operating states and the respective led displays: range led status meaning ident. Ident. On lights up as soon as the l...
Page 13
Technical data g&d devcon-center · 10 technical data interfaces network: 2 × rj45 socket rs232: 1 × rj11 socket rs485: 1 × rj45 socket service: 1 × mini-usb socket (typ b) usb 2.0: 2 × usb-a socket main power supply type: internal power pack connection: iec plug(iec-320 c14) voltage: ac100-240v/60-5...
Page 14
Notes 11 · g&d devcon-center.
Page 15
Notes g&d devcon-center · 12.
Page 16
Guntermann & drunck gmbh dortmunder str. 4a 57234 wilnsdorf germany phone +49 2739 8901-100 fax +49 2739 8901-120 http://www.Gdsys.De sales@gdsys.De a9200 076.