G.I.T PL-6000-TW-FM Series Owner's Manual - page 5
5
TWO WAY LCD TRANSMITTER OPERATIONS
Adjust real time clock
Keep pressing "
F
" button until
appear then release. The display will show the hour numbers flashing. Use "3"
button to select the
hour, minutes or Am/Pm. Then use the "1" button to increase or the "2" button to decrease time.
When it is done, press "
F
" button to exit.
Adjust start timer
Keep pressing "
F
" button until
appear then release. The display will show the hour numbers flashing. Use "3" button
to select the
hour, minutes or Am/Pm. Then use the "1" button to increase or the "2" button to decrease time. When it is
done, press "
F
" button to exit.
NOTE: You can exit a mode anytime by pressing the "
F
" button.
Adjust wake-up timer
Keep pressing "
F
" button until
appear then release. The display will show the hour numbers flashing. Use "3"
button to select the
hour, minutes or Am/Pm. Then use the "1" button to increase or the "2" button to decrease time.
When it is done, press "
F
" button to exit.
Enable start timer
When the start timer is set, you can enable it by pressing the "
F"
then "3" button. The "Start timer" icon
will turn ON and
the engine of your vehicle will start at preset time. When it is done, press "
F
" button to exit.