Summary of Dual Vintage Overdrive
Page 1
Dual vintage overdrive instrukcja obsługi user manual bedienungsanleitung.
Page 3
1 version 1.2 dear customer! Thank you for choosing our product. Dual vintage overdrive (g lab dvo) is the overdrive type stomp box effect with two overdriven channels (independent setting of gain, overdrive type and volume), solo volume boosting function and clean tone. Dvo can work as a stomp box ...
Page 4
2.
Page 5
3 1 - dip switches 2 - clean tone volume control 3 - solo boosting mode switch 4 - 1st and 2nd mode - solo mode indicator (full volume), 3rd mode – clean tone indicator (clean), 4th mode – bypass mode indicator 5 - 9v dc power supply socket 6 - amp output (out) 7 - + 3db treble boosting (post overdr...
Page 6
4 power supply dvo should be supplied from external regulated 9v (from 8.7v up to 9.6v) dc power supply, with 80 ma output or more. Before connecting please check if the connector’s polarisation is proper. Dvo is protected against opposite polarity and overvoltage. Mode of working selection in the b...
Page 7
5 mode 1 mode 2 mode 3 mode 4.
Page 8
6 connecting to a guitar amp the way of connecting dvo to a guitar amp, an amp type and an amp controls adjustment affect to a high degree of the final tone effect. Connecting to the amp guitar input in such case itis recommended to switch on clean amp channel and to set flat tone characteristics. T...
Page 9
7 parallel connection to the amp the connection with the amp is done by two circuits. Pre out output signal is connected to the amp guitar input. Output (out) signal from dvo should be connected to the amp effects loop using switching cable for dvo (product code 00804, ordered separately). Remark: i...
Page 10
8 silent tuning function (mute) electronic tuner should be connected to the tuner output. To mute press at the same time left and central footswitches. All indicators will start to blink. To exit mute function should be pressed any footswitch again. The guitar signal is active all the time at tuner ...
Page 11
9 considering the signal path, dvo can be connected between a guitar and gsc (all effects connected to gsc will be placed post this overdrive), or between gsc and an amp (all effects connected to gsc will be placed pre this overdrive), or to the one of gsc loop (dvo can be bypassed and some effects ...
Page 12
10 connected to the amp clean channel input, it is recommended to set tone controls of this channel in the following way: bass to maximum, middle at the centre, treble almost to minimum. If dvo is connected to return input of effects loop then controlling of tone at an amp is limited only to presenc...
Page 13
11 emc/emi & certificate of conformity emc/emi this device has been designed and manufactured to conform with directives and standards in the field of safety operations and electromagnetic interference. This device uses and can radiate radio frequency energy and, if not installed and used in accorda...
Page 14
12 do not place this product into the waste container ! This device is marked with a cross-lined waste container symbol according to 2002/96/eu directive on waste electric and electronic equipment. Such marking informs that after usage equipment can not be trashed together with other household waste...
Page 16
Nr rys. G03in000 company address elzab sa ul. Kruczkowskiego 39, 41-813 zabrze, poland phone: +48 32 272 20 21, fax: +48 32 272 81 90 sales & export department ...................................... Phone: +48 32 272 30 51 ext. 34, 39, 64 +48 32 272 20 21 ext. 308, 366, 468 e-mail: glab@glab.Com.Pl ...