1. DL manuals
  2. G-Lab
  3. Music Pedal
  4. True Bypass Wah-Pad
  5. User Manual

G-Lab True Bypass Wah-Pad User Manual

Other manuals for True Bypass Wah-Pad: User Manual

Summary of True Bypass Wah-Pad

  • Page 1

    True bypass wah-pad instrukcja obsługi user manual bedienungsanleitung.

  • Page 3

    1 dear customer! Thank you for choosing our product. The true bypass wah-pad (tbwp) is the device eliminating necessity of using a switching solution of a typical wah-wah effect. It assures also true bypassing the wah-wah effect circuit when it is not used. Connecting the tbwp with a guitar and an a...

  • Page 4

    2 1 - return signal connector 6 - guitar input (in) connector 2 - area of placing wah-wah effect 7 - indicator of wah-wah effect 3 - output (out) signal connector activation (activ) 4 - 9v dc power supply connector 8 - send signal connector 5 - signal indicating foot placement (sen) connector 9 - wa...

  • Page 5

    3 connecting the tbwp 1. - place inside the tbwp cabinet a battery and connect it (see the point “battery exchange”). 2. - place the wah-wah effect on the wah-pad and connect signal and power supply connectors (please check if the power connector polarisation is proper)..

  • Page 6

    4 3. - connect the guitar to the tbwp input in (plugging in the mono jack connector will cause in switching on the power supply of the tbwp and the wah-wah) and the cable from the amp to the tbwp output out (see the diagram from the page no. 1). 4. - place your foot on the wah-wah effect (the activ ...

  • Page 7

    5 switching on and off the power supply switching on the power supply is done by plugging in the guitar cable connector into the in tbwp input and switching off the power supply is done by unplugging this connector. It should be used mono jack connector to plug into in input. Power supply to supply ...

  • Page 8

    6 battery exchange to exchange the battery you should make less tight two holding screws and to remove (taking off) the cover (see the picture).It is recommended to use high capacity alkaline batteries. Fixing of the tbwp and the wah-wah effect fixing the tbwp with the pedalboard can be done by scre...

  • Page 9

    7 to eliminate movement of the wah-wah effect over the pad, you should stick movement limiters (adhesive elements supplied inside the package) on the upper surface of the pad’s plate (close to the wah-wah effect legs – as shown on the picture). To fix the wah-wah effect we suggest to unscrew the leg...

  • Page 10

    8 specification dimensions (depth x width x height) 301 x 104 x 55 mm weight (with battery) 840 g power supply 9v dc (regulated) power consumption 3 ma.

  • Page 11

    9 package content 1 - true bypass wah-pad tbwp 2 - 9v battery 3 - blocking ring 4 - 8 pieces of self-adhesive elements 5 - 4 sets of industrial velcro 6 - user manual 7 - warranty card.

  • Page 12

    10 emc/emi & certificate of conformity emc/emi this device has been designed and manufactured to conform with directives and standards in the field of safety operations and electromagnetic interference. This device uses and can radiate radio frequency energy and, if not installed and used in accorda...

  • Page 13

    11 certificate of conformity elzab s.A., ul. Kruczkowskiego 39, 41-813 zabrze, poland, hereby declares on own responsibility that the following product: true bypass wah-pad (g lab tbwp) that is covered by this certificate and marked with ce 07 label conforms with following standards: pn-en 60065:200...

  • Page 14

    12 do not place this product into the waste container ! This device is marked with a cross-lined waste container symbol according to 2002/96/eu directive on waste electric and electronic equipment. Such marking informs that after usage equipment can not be trashed together with other household waste...

  • Page 16

    Company address elzab s. A. Ul. Kruczkowskiego 39, 41-813 zabrze, poland phone +48 32 272 20 21, fax +48 32 272 81 90 web site ................................................................. Www.Glab.Com.Pl export department ................................................ Phone +48 32 272 30 51 i...