G-Lenz Security QIPCAM Fast User's Manual

Summary of QIPCAM

  • Page 1

    Glenz security ip camerafast user’s guide 1 fast user’s guide overview: qipcam is a section of depth the network camera which is welcome the populace and chats ordinary the camera. The function is formidable, simple yi yong. The direct connection mesh wire and chats ordinary the camera, establishes ...

  • Page 2

    Glenz security ip camerafast user’s guide 2 3. Provides the security account number hypothesis, the malicious ip visit rejection, the multi-person on-line onlooking and the single plane multiwindow jail looks at the function. 4. Phantom resolution: 640 x 480, 320 x 240, 160 x 120. Mjpeg phantom comp...

  • Page 3

    Glenz security ip camerafast user’s guide 3 2. Connection and usage presses down the chart to meet the camera, the mesh wire or the cross-wire, joins the power source to qipcam (12v.1a). When circular telegram, active status the lantern festival glitters, then the network state lamp is often bright,...

  • Page 4

    Glenz security ip camerafast user’s guide 4.

  • Page 5

    Glenz security ip camerafast user’s guide 5 3) description of parameters left side “the local network refers” only makes the parameter comparison to use, right flank is the qipcam current parameter. If qipcam and computer in identical local area network, ipcam parameter besides “ip”, other parameter...

  • Page 6

    Glenz security ip camerafast user’s guide 6 may need to input http://192.168.0.139:81 in the address field. If there are multiple qipcams in a lan, you need to assign different http ports for them to facilitate access from the outside network. Set up the username and password here when you log on qi...

  • Page 7

    Glenz security ip camerafast user’s guide 7 outside, should better register a dynamic domain name, and the target domain name, the user name, the password preserve qipcam. Later you only need input this dynamic domain name in the ie address fence to be possible to watch qipcam. For instance has regi...

  • Page 8

    Glenz security ip camerafast user’s guide 8 click the “preview” button to trigger ie automatically to view video, without installing any plug-in or driver. 3. Faqs q: i cannot detect ipcam. A: please make sure whether the power supply is normal, whether the network status indicator is on, and whethe...

  • Page 9

    Glenz security ip camerafast user’s guide 9 note: “service port” must be consistent with the “http port” of qipcam set above. If there are multiple qipcams in the lan, for example, the ip address of the 2 nd qipcam is 192.168.0.140 and the “http port” is 81, the setting is as follows: if you have se...

  • Page 10

    Glenz security ip camerafast user’s guide 10 q: how about if i have only one network cable? 1) a: we recommend you to spend some money (dozens of yuan) to buy a multi-port router with dialup function (adsl), e.G. Tp-linkfr40, to avoid the trouble of inserting/removing cables and rebooting the cable ...

  • Page 11

    Glenz security ip camerafast user’s guide 11 since port 80 is usually used by the modem, you can only use other ports, e.G. 81. Therefore, you can input like http://*.Net in the address field of ie to access qipcam from the internet. Note: some routers or modems do not allow users access servers in ...

  • Page 12

    Glenz security ip camerafast user’s guide 12 settings of netcam watcher settings of netcamcenter.

  • Page 13

    Glenz security ip camerafast user’s guide 13 monitoring effect figures of netcam watcher 4. Specifications of qipcam max. Frame rate: 25fps dynamic domain name system (ddns): supports dynamic ip: supports network interface: rj45 network protocols: arp/dhcp/ip/icmp/tcp/udp/http/ddns video compression...

  • Page 14

    Glenz security ip camerafast user’s guide 14 5. Other q&as what’s the valid transmission distance of common 5-kind twisted-pair cables? The standard distance is 100m. With the help of hub or switch, the distance can be increased to 480m. How long of a usb extension cable can a cradle-head webcam sup...