1. DL manuals
  2. G-TEL Enterprises
  3. Telephone
  4. CP820
  5. Owner's Manual

G-TEL Enterprises CP820 Owner's Manual

Summary of CP820

  • Page 1

    1 owners manual: cp820 (wire-line) getting started: 1. Connect the phone’s rj11 phone jack to the local telephone line. 2. Lift hand-set, listen for dial tone, lcd will display “dial”. 3. Dial desired number. 4. Phone will dial number and display call amount 5. Deposit coin(s) once other party answe...

  • Page 2: Attention:

    2 accessing program mode: attention: to enter program mode user must dial the phone number that the cp820 is connected to. This will give a busy signal and will keep the line from disconnecting. Next remove coin box from cp820 and press program button to access program mode. Press * to scroll throug...

  • Page 3

    3 a) start call line type select; line is default leave as is. B) free call code: depress the * key until you reach “free call mode” enter 4-digit pin once the code has been entered, the lcd displays “code in *as the owner of the payphone you are able to place free calls using the owner’s code. Pick...

  • Page 4

    4 e) rates and bands: depress the * key until you reach “rates,” to change desired tariff, refer to chart. Chart is at default rate band call type free 1 free calls 50c /untimed 2 untimed calls 25c/5min 3 local calls 25c/5min 4 local calls 25c/5min 5 toll calls 25c/5min 6 toll calls 50c/5min 7 ld ca...

  • Page 5: Technical Support

    5 zone tariff rate remark local calls $0.25 /5min max digits 10 long distance calls $0.50/5min max digits 11 information calls $0.50//calls max digits 8 long distance information calls $0.50 /call max digits 11 free calls free restricted calls restriction incoming calls free extended local/toll call...