1. DL manuals
  2. Gabarron
  3. Heater
  4. ECOHHR20
  5. Advanced Installation Instructions

Gabarron ECOHHR20 Advanced Installation Instructions

Manual is about: ECOMBI HHR SMART STORAGE HEATER

Summary of ECOHHR20

  • Page 1

    Advanced installation instructions ecombi hhr smart storage heater ecohhr20 ecohhr30 ecohhr40 please, read these instructions carefully before installing or using this appliance for the first time..

  • Page 2

    1 1. –important information when using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: • warning: please read all instructions before installing or using this heater for the first time. • t...

  • Page 3

    2 2. - installation instructions the symbols used in the text are explained below: warning this indication shows the possibility of causing death from electric shock. Warning this indication shows the possibility of causing death or serious injury. Caution this indication shows the possibility of ca...

  • Page 4

    3 3.- screw on the wall the superior fixing fitting, making the two required drills at the recommended distance depending on the model. Use the dowels and screws contained in the plastic bag to fix the fitting to the wall. 4. - fix the lateral fittings to the metal structure by using the appropriate...

  • Page 5

    4 6. - connect the heater using the wiring diagram included at the end of this manual. Tighten properly the connection block screws. Use only silicone insulated cables. Do not leave any remaining wire inside the heater. Warning touching live connections can cause serious personal injury. 7. - unscre...

  • Page 6

    5 9. - place the heating elements back into their original position. Place the second row of storage bricks with the flat side facing out and always on the heating elements supporting tabs. Next replace the metallic plate in the top of the storage core, between the bricks and the microthermal insula...

  • Page 7

    6 relocation warning: relocation to another location must be carried out by an experienced technician. If during reinstallation the thermal insulation shows any sign of damage, it must be removed and replaced by an identical part. Manually reset temperature limiter this heater employs a manually res...

  • Page 8

    7 key “-”: press the key to decrease different values. 3. - operating instructions caution: do not use this heater to dry clothes. Do not cover this heater at any time. 3.1. Connection / disconnection power switch.All models are equipped with a switch on the back side panel. It is used to connect an...

  • Page 9

    8 3.5. Operation mode: the hhr operates in weekly programming mode. The temperature level (eco, frost protection and comfort) can be set for each period of time (30’ minutes) in the different days in the week. Storage heater resistances will operate during off peak rate in order to charge the heater...

  • Page 10

    9 set point temperature level forced function it is possible to change temporarily the temperature level for the current time interval. The modification in the temperature level will be maintained until the next changed in programming temperature level. To change temporarily the current temperature ...

  • Page 11

    10 open window detection with open window detection activated, the fan assisted discharge and the balance resistance working will be disconnected automatically when a sharp decrease in temperature in the room is detected avoiding energy wastage. After this period of time, the storage heater returns ...

  • Page 12: 4.- Troubleshooting

    11 3.9.Default settings: by pushing the clock key at the same time as we turn on the heater with the power switch, located at the right-side panel, software resets to the default settings. Four horizontal blinking segments will appear in the screen to confirm it. The default programming, all time in...

  • Page 13: 6.- Main Components List

    12 5.- cleaning maintenance instructions before cleaning, make sure the power has been turned off at the circuit breaker panel and that the heating element of the heater is cool. Occasionally, clean dust with a dry, soft cloth. Do not use any solvent or abrasive product for cleaning. When the heatin...

  • Page 14: 7.- Connection Diagrams

    13 7.- connection diagrams ecohhr20 ecohhr30 l prg n l n l n l n prg.

  • Page 15: 8.- Technical Features

    14 ecohhr40 8.- technical features * storage heater elements and balancing element will never operate at the same time. Model ecohhr20 ecohhr30 ecohhr40 connection 240v ~ 240v ~ 240v ~ balancing element output* 550w 820w 1100w storage output 1742w 2613w 3484w charge period 7h 7h 7h charging 12,2 kwh...

  • Page 16

    Supplier: elnur uk ltd. Unit 1, brown street north leigh, lancashire. Wn7 1bu telephone +44(0)1942 670119 www.Elnur.Co.Uk info@elnur.Co.Uk manufactured by: elnur s.A. Travesía de villa esther, 11 28110, algete - madrid telephone +34 916281440 as part of the policy of continuous product improvement t...