Gabarron GTE Installation, Setup, Maintenance

Summary of GTE

  • Page 1

    Installation setup maintenance water heaters gtv ceramic vertical range from 75 to 200 l gth horizontal range of 100 and 150 l gte small capacity range of 30 and 50 l steel tank vitrified coting (gtv, gth and gte) we are grateful for the confidence you have shown by choosing a gabarrón electric wate...

  • Page 2

    Horizontal range – gth capacity litres power w maintenance consumption at 65° (kwh/24h) a mm b** mm c mm d mm net weight (kg) 100 1600 1,16 860 600 580 600 34 150 2200 1,54 1182 800 580 600 45 **distance between supports small capacity range – gte capacity litres power w maintenance consumption at 6...

  • Page 3

    Fiting the wall on which the water heater is installed must be able to support the weight of the apparatus when full of water. In the event that the wall is resistant but thin, guard-plates must be used on the other side of the wall. Attach the water heater with 10 mm diameter wall-plugs and screws ...

  • Page 4

    Low pressure assembly. If supply pressure exceeds 5.5 bars, it is compulsory to install a pressure reducer in the entry point of the house. Recommended pressure is from 3 to 4 bars. The installation is made with a 7 bar membrane safety valve connected to the water entry of the water heater equipped ...

  • Page 5

    - the earth of the apparatus is compulsory (there is a connection with the following symbol ). You must ensure it is connected to a fixed socket with an earth device. Thermostat: it is a high quality component built, calibrated and monitored carefully. Its mission is to maintain and limit the temper...

  • Page 6

    Setup warning! Never connect the apparatus without it being full of water. It is necessary to completely ‘drain’ the water heater, the tubes and the taps of air that could be inside to avoid disagreeable noises. Before connecting the water heater to the network, fill it completely with water by leav...