Electric designer radiators rf4p rf4e rf6p rf6e rf8p rf8e rf10p rf10e rf12p rf12e rf14p rf14e installation instructions and user guide please read these instructions before installing or using this appliance for the first time..
Installation instructions 1.- warning please read these instructions before installing or using this appliance for the first time. • the warranty of the heater will not cover any damage caused by non observance of any of these instructions. • this guide must be kept and given to any new owner. • ple...
3.- using the thermal radiator electronics models rfp operation in electronic models is controlled by means of two rotary knobs. It is possible to regulate the temperature level with accuracy by means of the temperature selector. The heating indicator will be lit when the heater is consuming energy....
Digitals models rfe digital display: it shows the time, temperature and other messages. Frost protection key: if the display shows the time the heater is in frost protection mode. Press this key to shift from frost protection mode to standard mode and vice versa. Heating indicator: this small dot wi...
Sun, moon and 7 temperatures the electronic programmer is able to handle three temperature levels during the 24h of the day. Press the key to set the sun temperature. The display will show the sun temperature value blinking. Set the sun temperature value by means of the + o – keys and press the key ...
Weekly programmes it is possible to allocate different programs to different days of the week. To do this, the controller has to be upgrade from 24hr mode (factory default) to 24hr/7days mode as follows: move the selector to 0 position, the display will be off. Press the key and at the same time tur...
Wiring sensor controller sensor controller models rf-e r heating element ts safety cut - out c three way selector models rf-p r heating element ts safety cut out c three way selector.
