Gadmei GM2400 User Manual - page 3
Introduction
1.1 Function and Features
1.2 Application
1.3 Accessories
1.4 Technical specifications
Hardware and Installation
2.1 Transmitter (TXV2400)
Buttons and Rear Panel Instructions
2.2 Receiver (TRV2400)
Buttons and Rear Panel Instructions
2.3 Placement of Transmitter (TXV2400)
2.4 Placement of Receiver (TRV2400)
2.5 Placement of Antenna
Operation Instruction
3.1 Signal Channel Selection
3.2 Power Switch
3.3 Channel Selection
3.4 Infrared control feedback
FAQ and Troubleshooting
--------------------------------------------------1
-----------------------------------1
-----------------------------------------------1
-----------------------------------------------2
---------------------------------2
-----------------------------------3
--------------------3
--------------------3
-------------------4
----------------------6
-----------------------------------6
----------------------------------------7
--------------------------------7
---------------------------------------------7
----------------------------------------8
-------------------------------9
---------------------------------10
CONTENTS
1.
2.
3.
4.
4. FAQ and Troubleshooting
Indicator does not light and there is no image
Make sure there is power supply of the transceiver.
Change receiver's transmitting channel (refer to operation
instruction/ Channel switch).
Adjust transceiver's placement (refer to hardware and installation
instruction).
Infrared Control Feedback malfunction
Make sure that the connection and installation of the transmitter is
correct.(refer to hardware and installation instruction).
Please adjust transceiver's antenna and placement (refer to
placement of antenna).
image is interfered
Change receiver's transmitting channel (refer to Channel selection).
Please adjust transceiver's placement (refer to hardware and
installation instruction)
1.
2.
3.
1.
2.
1.
2.
Thanks for use GADMEI GM2400 wireless A/V transceiver!
In order to use our product more conveniently, please read this manual carefully.