Gage bilt tools are available worldwide e-mail us for distributor near you. S/n: 1068 and above please contact gage bilt for all other serial numbers. Gage bilt inc. 44766 centre court +1 (586) 226-1500 clinton twp. Mi 48038 usa +1 (586) 226-1505 fax e-mail: solutions@gagebilt.Com / www.Gagebilt.Com...
2 rev. 4/17 gb2581 s/n: 1068 and above please contact gage bilt for all other serial numbers. Table of contents page description and technical specifications ............................................................................................................................... 3 description ...
3 rev. 4/17 gb2581 s/n: 1068 and above please contact gage bilt for all other serial numbers. Specifications weight - 6 lbs. 10 oz. (3.0 kg) hyd. Pressure req'd - 7,400 psi (510.2 bar) pull 3,200 psi (220.6 bar) max return hyd. Power source - gb940 powerunit or equivalent hydraulic oil - see power u...
4 rev. 4/17 gb2581 s/n: 1068 and above please contact gage bilt for all other serial numbers. Description of functions gb2581 gb2581a electric actuator handle electrical control cord hydraulic hose—return hydraulic hose—pull air line air actuator hydraulic hose—pull hydraulic hose—return handle defl...
5 rev. 4/17 gb2581 s/n: 1068 and above please contact gage bilt for all other serial numbers. General safety rules: 1. For multiple hazards, read and understand the safety warnings before installing, operating, repairing, maintaining, changing accessories on, or working near the assembly power tool ...
6 rev. 4/17 gb2581 s/n: 1068 and above please contact gage bilt for all other serial numbers. Pull cycle return cycle hydraulic diagram when the tool is connected to a powerunit, operation is controlled by an electric actuator in the handle. When the electric actuator is depressed, a directional val...
7 rev. 4/17 gb2581 s/n: 1068 and above please contact gage bilt for all other serial numbers. How to set-up the gb2581 / gb2581a warning: only qualified and trained operators should install, adjust or use the assembly power tool for non-threaded mechanical fasteners. Warning: operator must read and ...
8 rev. 4/17 gb2581 s/n: 1068 and above please contact gage bilt for all other serial numbers. How to use the gb2581 / gb2581a warning: only qualified and trained operators should install, adjust or use the assembly power tool for non-threaded mechanical fasteners. Warning: operator must read and und...
9 rev. 4/17 gb2581 s/n: 1068 and above please contact gage bilt for all other serial numbers. Torque specifications socket head cap screw (406030) = 20 inch lbs. Set screw (401731) = 20 inch lbs. Daily maintenance warning : tool must be maintained in a safe working condition at all times and examine...
10 rev. 4/17 gb2581 s/n: 1068 and above please contact gage bilt for all other serial numbers. Providing all maintenance conditions have been met, follow this systematic approach to diagnosis. 1. No operation when electric actuator (240122) or air actuator assy (240123) is depressed a.) check poweru...
11 rev. 4/17 gb2581 s/n: 1068 and above please contact gage bilt for all other serial numbers. If a tool is performing poorly or leaking, a complete overhaul may be necessary. Service kit (gb2581ks) contains a complete set of o'rings, back-up rings and screws. Perform overhaul in a clean, well lit a...
12 rev. 4/17 gb2581 s/n: 1068 and above please contact gage bilt for all other serial numbers. Gb2581– parts list.
13 rev. 4/17 gb2581 s/n: 1068 and above please contact gage bilt for all other serial numbers. Gb2581a– parts list.
14 rev. 4/17 gb2581 s/n: 1068 and above please contact gage bilt for all other serial numbers. Gage bilt also supplies pin & collar swage inspection gages to certify correct swage installation. Fastener dia. 13/64 asp06-745b-23 asp06-745b-48 asp06-204d-27os asp06-204d-37os 17/64 asp08-745b-23 asp08-...
15 rev. 4/17 gb2581 s/n: 1068 and above please contact gage bilt for all other serial numbers. Seller warrants that all goods covered by this catalog will conform to applicable specifications and will replace or repair, f.O.B. Our plant, any goods providing defective from faulty workmanship, or mate...
