1. DL manuals
  2. Gage Bilt
  3. Power Tool
  4. GB2628
  5. Original Instruction

Gage Bilt GB2628 Original Instruction

Summary of GB2628

  • Page 1

    Gb2628/gb2628a installation tool gage bilt tools are available worldwide e-mail us for a distributor near you. Original instructions 44766 centre court clinton twp. Mi 48038 usa ph: +1 (586) 226-1500 fax: +1 (586) 226-1505 solutions@gagebilt.Com / www.Gagebilt.Com gage bilt made in usa.

  • Page 2

    2 rev. 6/17 gb2628 installation tool table of contents page eu conformity and warranty .................................................................................................................................................... 3 description and technical specifications ........................

  • Page 3: Declaration Of Conformity

    3 rev. 6/17 gb2628 installation tool seller warrants that all goods covered by this catalog will conform to applicable specifications and will replace or repair, exw our plant, any goods providing defective from faulty workmanship, or material, for 1 year from date of shipment . Said warranty to rem...

  • Page 4

    4 rev. 6/17 gb2628 installation tool technical specifications weight - 20.8 lbs. (9.43 kg) hyd. Pressure req'd - 7,400 psi (510.2 bar) pull - 3.200 psi (220.6 bar) return hyd. Power source - gb940 powerunit or equivalent - gb910 or gb912 powerunit or equivalent hydraulic oil - see power unit for hyd...

  • Page 5

    5 rev. 6/17 gb2628 installation tool description of functions gb2628 gb2628a electric actuator handle electrical control cord hydraulic hose—return hydraulic hose—pull air line air actuator hydraulic hose—pull hydraulic hose—return handle.

  • Page 6

    6 rev. 6/17 gb2628 installation tool general safety rules: 1. For multiple hazards, read and understand the safety warnings before installing, operating, repairing, maintaining, changing accessories on, or working near the assembly power tool for non-threaded mechanical fasteners. 2. Only qualified ...

  • Page 7

    7 rev. 6/17 gb2628 installation tool when the tool is connected to a hydraulic powerunit, operation is controlled by an electric actuator (240122) (gb2628) or a piloted air actuator (240123) (gb2628a) in the handle. When the actuator is depressed, a directional valve in the hydraulic powerunit direc...

  • Page 8

    8 rev. 6/17 gb2628 installation tool how to set-up the gb2628 / gb2628a warning: only qualified and trained operators should install, adjust or use the assembly power tool for non-threaded mechanical fasteners. Warning: operator must read and understand all warnings and cautions. Warning: it is requ...

  • Page 9

    9 rev. 6/17 gb2628 installation tool how to use the gb2628 / gb2628a lockbolts 1. Insert fastener through the work piece. 2. Slide collar over fastener. 3. Insert fastener into nose assembly. 4. Press actuator to start cycle. 5. Release actuator as soon as fastener breaks. 6. Repeat steps 1-5. Warni...

  • Page 10

    10 rev. 6/17 gb2628 installation tool daily cleaning and lubrication of nose assembly will greatly reduce downtime and increase life of components. Using sewing machine oil, or an equivalent cleaner/lubricant, follow instructions below. Cleaning and lubricating procedure lubricating lubricate nose a...

  • Page 11

    11 rev. 6/17 gb2628 installation tool providing all maintenance conditions have been met, follow this systematic approach to diagnosis. 1. No operation when actuator is depressed. A.) check powerunit power source. B.) control cord may be loose or damaged. C.) faulty electric actuator. Replace. D.) c...

  • Page 12

    12 rev. 6/17 gb2628 installation tool if a tool is performing poorly or leaking, a complete overhaul may be necessary. Service kit (gb2628ks) contains a complete set of o'rings, back-up rings and screws. Perform overhaul in a clean, well lit area using care not to scratch or nick any smooth surface ...

  • Page 13

    13 rev. 6/17 gb2628 installation tool gb2628 parts list (electric actuated).

  • Page 14

    14 rev. 6/17 gb2628 installation tool gb2628a parts list (air actuated).

  • Page 15

    15 rev. 6/17 gb2628 installation tool accessories gb2628/gb2628a nose assembly selection chart (sold separately) fastener dia. Nose assembly 1/2" bom16-7624a-40 5/8" bom20-585-41 3/4" bom24-585-46 5/8" 3/4" 16mm 20mm contact gage bilt for your requirements contact gage bilt for your requirements loc...

  • Page 16

    16 rev. 6/17 gb2628 installation tool the gb940 hydraulic powerunit is a light-weight, portable power source designed to operate on a wide range of hydraulic installation tools. The unit is electrically powered and delivers up to 10,000 psi (689.5 bar) working pressure with simple adjustable hydraul...

  • Page 17

    17 rev. 6/17 gb2628 installation tool the gb910 hydraulic powerunit is a portable power sourcedesigned to operate a wide range of hydraulic installation tools. The unit air powered, air actuated and delivers up to 10,000 psi (689.5 bar) working pressure. The actuator on the installation tool remotel...

  • Page 18

    18 rev. 6/17 gb2628 installation tool powerunits available (sold separately) the gb912 hydraulic powerunit is a portable power source designed to operate a wide range of hydraulic installation tools. The unit air powered, air actuated and delivers up to 10,000 psi (689.5 bar) working pressure. The a...

  • Page 19

    19 rev. 6/17 gb2628 installation tool this page intentionally left blank.

  • Page 20

    20 rev. 6/17 gb2628 installation tool teflon® is a registered trademark of e.I. Dupont de nemours & co. Lubriplate® is a registered trademark of fiske brothers refining co. Slic-tite® is a registered trademark of la-co industries inc. Loctite® is a registered trademark of henkel corporation. The use...