Rev. 2/16 1 gb715 s/n: 1242 and above please contact gage bilt for all other serial numbers. Gb715 installation tool gage bilt made in u.S.A. Gage bilt inc. 44766 centre court (586) 226-1500 clinton twp. Mi 48038 (586) 226-1505 fax e-mail: solutions@gagebilt.Com / www.Gagebilt.Com gage bilt tools ar...
Rev. 2/16 2 gb715 s/n: 1242 and above please contact gage bilt for all other serial numbers. Table of contents description page description and technical specifications ............................................................................................................................... 3 d...
Rev. 2/16 3 gb715 s/n: 1242 and above please contact gage bilt for all other serial numbers. Specifications weight - 3.80 lbs. (1.7 kg) air pressure req'd - 90-100 p.S.I. (6.2-6.9 bar) max. Air consumption - .16 scf/cycle (4.53 l/cycle) hydraulic oil - automatic transmission oil, dexron iii®, or equ...
Rev. 2/16 4 gb715 s/n: 1242 and above please contact gage bilt for all other serial numbers. Description of functions air inlet actuator handle head cylinder.
Rev. 2/16 5 gb715 s/n: 1242 and above please contact gage bilt for all other serial numbers. Safety warnings general safety rules: 1. For multiple hazards, read and understand the safety instructions before installing, operating, repairing, maintaining, changing accessories on, or working near the a...
Rev. 2/16 6 gb715 s/n: 1242 and above please contact gage bilt for all other serial numbers. Principle of operation when the actuator lever assy is depressed, the pressurized air inside of the tool is released allowing spring pressure to move the valve spool assy causing the air to be redirected. Th...
Rev. 2/16 7 gb715 s/n: 1242 and above please contact gage bilt for all other serial numbers. The tool is shipped with a plastic plug in the air inlet connector. The connector has a 1/4-18 female pipe thread to accept end-user air hose fitting. The tool comes with oil and is ready to use. 1. Remove p...
Rev. 2/16 8 gb715 s/n: 1242 and above please contact gage bilt for all other serial numbers. How to use the gb715 blind rivets 1. Insert fastener through the work piece. 2. Insert tool onto fastener. 3. Press actuator to start cycle. Continue to press until fastener breaks. 4. Release actuator as so...
Rev. 2/16 9 gb715 s/n: 1242 and above please contact gage bilt for all other serial numbers. Torque specifications button head cap screws (a-928) = 40 inch lbs. Packing plug (704118) = 45 foot lbs. Flexlock nut (400559) = 40 inch lbs. End cap (715111) = 45 foot lbs. Button head cap screws (402482) =...
Rev. 2/16 10 gb715 s/n: 1242 and above please contact gage bilt for all other serial numbers. Should it become necessary to completely refill the tool (as would be required after tool has been dismantled and reassembled), take the following steps. 1. Remove head cylinder assy (715110) from handle as...
Rev. 2/16 11 gb715 s/n: 1242 and above please contact gage bilt for all other serial numbers. Troubleshooting providing all maintenance conditions have been met, follow this systematic approach to diagnosis. 1. More than one pull is required to break rivet. A) tool needs to be bled. (see filling and...
Rev. 2/16 12 gb715 s/n: 1242 and above please contact gage bilt for all other serial numbers. Perform overhaul in a clean, well lit area using care not to scratch or nick any smooth surface that comes in contact with an o'ring. Use of lubriplate® (gage bilt part no. 402723) or other lubricant is rec...
Rev. 2/16 13 gb715 s/n: 1242 and above please contact gage bilt for all other serial numbers. To inspect air cylinder bore, remove base cover (704125) and o’ring (s725). Any further disassembly will require removal of the head cylinder assy (715110) first. For complete disassembly. 1. Remove base co...
Rev. 2/16 14 gb715 s/n: 1242 and above please contact gage bilt for all other serial numbers. Parts list.
Rev. 2/16 15 gb715 s/n: 1242 and above please contact gage bilt for all other serial numbers. First aid measures eye: no specific first aid measures are required. As a precaution, remove contact lenses, if worn, and flush eyes with water. Skin: no specific first aid measures are required. As a preca...
Rev. 2/16 16 gb715 s/n: 1242 and above please contact gage bilt for all other serial numbers. Gb715 - selection chart part no. Description 704149 piston rod wrench 704150 packing plug wrench 704151 power cylinder tool 704152 seal guide 704153 bleeder bottle s1178 valve extractor 704262 valve spring ...
Rev. 2/16 17 gb715 s/n: 1242 and above please contact gage bilt for all other serial numbers. Dexron® is a registered trademark of general motors corporation. Lubriplate® is a registered trademark of fiske brothers refining. Loctite® is a registered trademark of henkel corporation. Seller warrants t...
