Gaggenau AH 360-720 Operating And Assembly Instructions Manual

Other manuals for AH 360-720: Operating And Assembly Instructions Manual

Summary of AH 360-720

  • Page 1

    Operating and assembly instructions ah 360-720 extractor hood.

  • Page 2

    Ah 360-720 1 preface safety notes page 3 1. Important notes page 4-5 1.1 for your safety page 4 1.2 operating for the first time page 5 1.3 about use page 5 2. Structure and operating principle page 6-7 2.1 structure of the appliance page 6 2.2 accessories/special accessories page 6 2.3 operating pr...

  • Page 3

    2 preface with your new extractor hood, working in the kitchen will be even more fun. The appliance offers you a number of advantages : – effective extraction thanks to the so-called “coanda effect” – low operating noise to ensure that you will be able to use this appliance in all its diversity, rea...

  • Page 4

    Safety notes 3 warning - to reduce the risk of fire, electric shock, or injury to persons, observe the following: a.) use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer. B.) before servicing or cleaning unit, switch power off at service pan...

  • Page 5

    4 1. Important notes 1.1 for your safety damaged appliances must not be operated. Connecting cables must not come into contact with hot cooking surfaces. Do not operate the extractor hood without inserted lamps. Never operate the appliance without a grease filter. Hazardous or explosive substances a...

  • Page 6

    1.2 operating for the first time before operating the appliance for the first time, please pay attention to the following notes: the appliance must be installed and connected by a specialist before it is operated for the first time. Conscientiously read through the operating and assembly instruction...

  • Page 7

    6 2. Structure and operating principle 2.1 structure of the appliance 2.2 accessories/special accessories you can order the following special accessories: – back draught flap rk 040-150: back draught flap for insertion in the extractor’s blow-out opening – flexible aluminium pipe ar 040-150: dn 150 ...

  • Page 8

    2.3 operating principle this extractor hood swiftly and silently extracts all odours produced while cooking. You can set different intensity levels depending on the intensity of odours. The fan in the extractor hood sucks in the kitchen vapours and passes them through the grease filter to outdoors. ...

  • Page 9

    8 3.1 switching on and off switching on – turn the “ventilation level” control knob to the ventilation level you require (fig. 6). – the set level is displayed. After a power failure , the extactor will not go on again automatically. You can recommence operation by turning a knob or by pressing any ...

  • Page 10

    9 3.2 special functions intensive level you should select the intensive level when browning and frying in an open pan. Switching on: (fig. 9) – turn the control knob to a ventilation level (1-3). – press the intensive level key. The intensive level symbol appears on the display. The previously selec...

  • Page 11

    10 cleaning the grease filters: the (grease filter saturation) symbol flashes on the display after an operating time of 30 hours. Flashing of this symbol signals to you that the grease filters have to be cleaned. The grease filters can be cleaned at any time, even if the (grease filter saturation) s...

  • Page 12

    Cleaning the glass plates apply commercially available window cleaning agent with a soft, moist cloth. To facilitate cleaning, you can detach the glass plates as follows: detach the grease filters. In the extractor hood, you will find two openings on the upper side through which you can lift the gla...

  • Page 13

    12 the appliance must be disconnected from the power supply during all repair work. If the appliance does not function correctly, check the fuses first. If the power supply is functioning correctly, but your appliance still does not work, please contact your gaggenau dealer who will provide you with...

  • Page 14

    13 6.1 technical data weight: 41 kg without ventilation duct dimensions: 47 3 / 16 ´ ´ x 22 ´ ´ / 1198 x 560 mm electrical connection pay attention to the rating plate data. The appliance must only be connected by an authorised specialist . The specialist is respon- sible for perfect functioning of ...

  • Page 15

    6.2 installation warning - to reduce the risk of fire, electric shock, or injury to persons, observe the following: a.) installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction. B.) sufficient...

  • Page 16

    15 flexible aluminium pipes, corrosion-protected sheet metal pipes and exhaust air pipes whose material conforms to fire b1 in accordance with din 4102 can be used. Exhaust air pipes should have a nominal diameter of 6 ´ ´ / 150 mm. Pay particular attention to ensuring that – the exhaust air ducts a...

  • Page 17

    16 proceed as follows: – from the bottom edge of the hood, mark a center line on the wall. – with the aid of the drilling template, mark the positions of the screws on the wall. Mark the contour of the hook-in area. This will make it easier to hook in the hood (fig. 16). – pay attention to the minim...

  • Page 18

    – secure the hood to the wall using the 4 screws b (fig. 18). – establish the pipe connection. – establish the electrical connection. – extract the protective file from the chimney paneling. Note: avoid damaging the sensitive stainless steel surfaces. – fit the top of the chimney into the base. Make...

  • Page 19

    5551 mcfadden avenue huntington beach, ca 92649 usa y (800) 828-9165 · fax (714) 901-0979 www.Gaggenau.Com/us gaggenau hausgerÄte gmbh p.O. Box 10 02 50 · d - 80076 mÜnchen germany y (0 89) 45 90-01 fax (0 89) 45 90-23 47.