Gaggenau CE 491-610 Use And Care Manual

Other manuals for CE 491-610: Installation Instructions Manual
Manual is about: Electronic

Summary of CE 491-610

  • Page 1

    Electronic cooktop ce 491-610 ce 492-610 gaggenau use and care manual.

  • Page 3

    Important safety instructions 4 fire safety 4 burn prevention 4 child safety 5 cleaning safety 5 cookware safety 5 proper installation and maintenance 5 removable twist knob 6 damage to the cooktop 6 operating for the first time 7 causes of damage 7 pots and pans 7 food spills 7 scratches on the gla...

  • Page 4

    Fire safety read and save these instructions. Do not use aluminum foil or protective liners to line any part of an appliance, especially surface unit drip bowls or oven bottom. Installation of these liners may result in a risk of electric shock or fire. Use this appliance only for its intended use a...

  • Page 5

    Use high heat settings on the cooktop only when necessary. To avoid bubbling and splattering, heat oil slowly on no more than a low-medium setting. Hot oil is capable of causing extreme burns and injury. Never move a pan of hot oil, especially a deep fat fryer. Wait until it is cool. Child safety wh...

  • Page 6

    Do not repair or replace any part of the appliance unless specifically recommended in this manual. Refer all servicing to a factory authorized service center. To avoid electrical shock hazard, before servicing the appliance, switch power off at the service panel and lock the panel to prevent the pow...

  • Page 7

    7 remove the packaging from the appliance and dispose of it according to local regulations. Be careful to remove all accessories from the packaging. Keep packaging elements and plastic bags away from children. Check the cooktop for transport damage after unpacking it. Do not connect the cooktop if i...

  • Page 8

    8 ce 491 is supplied with a stainless steel frame. Ce 492 is suitable for flush mounting into stone worktops. The operation of both types is identical. Features of your new cooktop cooking zones ø 5 11 / 16 " ø 5 11 / 16 " - 8 1 / 4 " - 10 5 / 8 " ø 7 1 / 16 " - 7 1 / 16 " x 16 5 / 16 " (ø 14.5 cm) ...

  • Page 9

    9 special accessories you can order the following special accessories: • bt 481-000: cast-iron roaster with lid, non- stick coated, suitable for the roasting zone. Control panel display for • heat setting 1 - 9 • standby 0 • residual heat • cooking zone extension • memory-cooking control panel for •...

  • Page 10

    10 main switch the electronics in the control panel are switched on using the main switch. Touch the l symbol until the cooking zone displays show 0. Now the cooktop is ready for use. Touch the l symbol until the cooking zone displays go off. All the cooking zones are switched off. The residual heat...

  • Page 11

    11 switching on and off touch the l main switch symbol. A signal is sounded. The cooking zone displays show 0. Now the cooktop is ready for use. The cooktop switches off automatically if no further inputs are made within approximately 10 seconds. By touching the main switch symbol at any time the co...

  • Page 12

    12 main switch with memory function the heating and timer settings remain stored for 5 seconds after the cooktop has been switched off. If you switch the cooktop on again within 5 seconds after having switched it off accidentally, the cooktop will operate using the previously stored settings. Residu...

  • Page 13

    13 extension of the dual size cooking zone the size of the front left cooking zone can be altered. The cooktop must be switched on by the main switch. 1 select the cooking zone. To do this, slide the twist knob in the direction of the corresponding cooking zone symbol. The indicator light comes on a...

  • Page 14

    14 extension of the roasting zone both right cooking zones convert together with an additional zone, to create an oval roasting zone especially suitable for the gaggenau cast roaster. When the extension is activated, both right cooking zones and the additional zone operate as one single cooking zone...

  • Page 15

    15 cooking level cooking method examples 9 boiling water searing meat heating fat, liquids boiling soup, sauce blanching vegetables 8 - 6 roasting meat, fish, potatoes 7 - 6 browning flour, onions roasting almonds, breadcrumbs baking pancakes, egg dishes boiling in open pot liquids 6 - 5 frying baco...

  • Page 16

    16 ! Warning – never leave the cooktop unattended when in use. Boilovers cause smoking and greasy spill- overs may ignite. With the timer you can program an automatic switch-off time between 1 and 90 minutes in 1-minute-steps for a cooking zone (automatic switch-off). You can set a time value for ev...

  • Page 17

    17 notes the automatic switch off (holiday safeguard) can also be activated while using the timer function. The timer function is no longer active after a power cut. You can use the timer independently from the cooking zones and without switch-off function. The timer can also be used when the cookto...

  • Page 18

    18 all cooking zones feature an automatic quick boil function. When the automatic quick boil function is activated, the set cooking level is boosted for several minutes. This ensures that the continued cooking or simmering temperature of the food is reached faster. The appliance switches automatical...

  • Page 19

    19 child lock you can prevent the cooktop from being switched on unintentionally so that children cannot switch on the cooking zones. The child lock remains activated permanently. Note: the child lock could be activated or deactivated unintentionally when the appliance is cleaned using water or as a...

  • Page 20

    20 switching off the confirmation tone a short buzz confirms that a control panel has been touched. This buzzer can be switched off 1 switch on the cooktop using the main switch. 2 set all cooking zones to heat setting 3. 3 switch off the cooking zones one after the other, beginning with the front r...

  • Page 21

    21 operating principle memory cooking is useful if you require several different heat settings in order to prepare a dish which you cook particularly often. The conditions must always be the same, e.G. The same saucepan, the same quantity and the same initial temperature of the dish. You can store o...

  • Page 22

    22 if you store a memory event for the roasting zone, first select either of the right cooking zones. Activate the roasting zone extension within 30 seconds after selecting the cooking zone. The automatic quick boil function cannot be activated for memory cooking. The automatic switch off (holiday s...

  • Page 23

    23 cleaning and care do not clean the cooktop using high pressure cleaners or steam jets. ! Caution, risk of burns! Before cleaning, wait until the residual heat display has gone out. ! Caution, risk of injury! The blade of the included glass scraper is very sharp. Replace damaged blades immediately...

  • Page 24

    24 the temperature of the cooking zones is controlled by switching the heat on and off, this means that it is not always possible to see the red, glowing heat. If you select a low heat setting, the heat will switch off more often than at higher heat settings. Even at the highest setting the heat swi...

  • Page 25

    25 not every malfunction can be ascribed to a defect of your cooker. If your appliance should not function properly, search for the fault in the list below. If you are not successful in correcting the fault with the aid of the list below, then contact your gaggenau after-sales service. The cooktop d...

  • Page 28

    Gaggenau 780 dedham street canton, ma 02021 telephone: 877.4gaggenau usa www.Gaggenau-usa.Com gaggenau hausgeräte gmbh carl-wery-straße 34 81739 münchen germany www.Gaggenau.Com 9000159826 eb 8708 enus.