- DL manuals
- Gaggenau
- Cooktop
- KG 291 CA
- Operation And Installation Manual
Gaggenau KG 291 CA Operation And Installation Manual
Summary of KG 291 CA
Page 1
Operation, maintenance and installation manual kg 291 gas cooker.
Page 3
1 1. Important notes page 3-4 for your safety page 3 operating for the first time page 3 about use page 4 2. Features page 5 features of the appliance page 5 control knob page 5 burner parts page 5 3. Operating principle page 6 4. Operation page 7-8 5. Settings table page 9 6. Cookware recommendatio...
Page 4
2 the large stainless-steel gas hob – a combination of performance and cooking enjoyment. • generous cooking zones provide lots of space to work • large performance range with five burners and precise output control • maximum comfort and safety through electronic flame detection and automatic re-ign...
Page 5
3 for your safety you must not operate the appliance if it is damaged. When connecting electrical appliances in the proxi- mity of the appliance, make sure that connecting leads do not come into contact with hot cooking surfaces! As the user, you yourself are responsible for maintenance and proper u...
Page 6
About use the appliance is intended solely for use in the household and must not be put to any other uses. Use the appliance to prepare meals only. It must not be used to heat up the room in which it is installed. Use of a gas cooker generates heat and humidity in the room where it is installed. Thi...
Page 7
5 features of the appliance control knob burner parts 1 pot grids (3 parts, the left and right part are identical) 2 large (wok) burner 5 kw 3 large burner 4 kw 4 normal burner 2 kw 5 ventilation openings 6 symbol for corresponding cooking position 7 indicator light 8 flame setting: 0 off high setti...
Page 8
6 3. Operating principle the gas hob features two normal burners, two large burners and a wok burner. The appliance features one-hand operation, flame detection and automatic re-ignition. The ignition is activated when the control knob is turned. Should the flame go out during operation, the applian...
Page 9
7 switching on • place a suitable pot or a pan on the corresponding cooking position. • press down the control knob for the corresponding cooking position and turn it to the required position between the and symbols. The burner ignites automatically. • when using large pots or pans you should ignite...
Page 10
Appliance has cooled down sufficiently, check this burner to see if all the burner parts have been assembled correctly. Check if the burner or the electrode has been soiled (see trouble shooting guide on page 16). Note: if a malfunction occurs on one burner, you can continue using the remaining burn...
Page 11
9 5. Settings table cooking cooking method examples level high boiling water searing meat heating fat, liquids boiling soup, sauce blanching vegetables roasting meat, fish, potatoes from browning flour, onions roasting almonds, breadcrumbs baking pancakes, egg dishes to boiling in open pot liquids s...
Page 12
Pots with a diameter of less than 90 mm or more than 280 mm / 320 mm for the large (wok) burner should not be used. When using large pots, pay attention to keeping to a minimum distance of 50 mm between the cooking vessel and combustible surroundings. A minimum distance of 50 mm must be observed bet...
Page 13
The wok and accessories (not included in the scope of delivery) – the round-bottom wok is the ideal wok for your gas cooker. – the wok looks like a hollow semisphere with a long handle or wooden handle. It has a rounded base and slanted sides. The thin steel passes the heat swiftly to the inside, bu...
Page 14
12 keep the ventilation openings on the rear of the appliance clean. Do not block the ventilation openings. The burners (burner head cover, burner ring and burner head) will change their color during operation and become darker. This change in color will not influence the use-value. Please thoroughl...
Page 15
Do not use scouring agents, abrasives or chemically aggressive cleaners (for example oven cleaner)! Do not use any nitro polishing agents for cleaning! Do not use any abrasive sponges either. Before cleaning, please wait until the cooktop has cooled to hand-warm. • first lift one of the pot grids on...
Page 16
14 part / material suggested cleaning procedure important reminders pot grid take pot grids off for cleaning. Do not clean in a dishwasher. (enamel on soak in sink. Clean with detergent soak burnt-in remainders in sink. Cast iron) and brush. Abrasive cleaners, used too vigorously or too often can ev...
Page 17
The appliance must be disconnected from the power and gas supply during all repair work. In the event of malfunctions, check whether the gas and electricity supplies are in proper working order. The cooktop cannot be used during a power failure. If the cooktop is being used when the power failure oc...
Page 18
16 10. Trouble shooting switch the appliance on again. Should the appliance still not work, contact your gaggenau after-sales service. Burner does not ignite when switched on indicator lights are off all indicator lights are flashing indicator lights go off, only the indicator light of the affected ...