1. DL manuals
  2. Gaggenau
  3. Fryer
  4. VF 411-610
  5. Operation And Assembly Instructions

Gaggenau VF 411-610 Operation And Assembly Instructions

Manual is about: Electric

Summary of VF 411-610

  • Page 1

    Operation and assembly instructions vf 411-610 electric deep fryer.

  • Page 3

    Vf 411-610 1 important safeguards page 3 1. Important notes page 4-5 for your safety page 4 about use page 5 operating for the first time page 5 2. Features page 6 features page 6 special accessories page 6 3. Operation page 7-10 operating principle page 7 switching on page 8 switching off page 9 re...

  • Page 4

    2 congratulations on buying your new “vario” appliance. Before switching your appliance on for the first time, we would like you to familiarize yourself with your new appliance. In this manual you will find important notes on safety and operation. These will serve to ensure your personal safety and ...

  • Page 5

    1. Read all instructions. 2. To eliminate the risk of burns or fire by reaching over the heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally ...

  • Page 6

    4 for your safety do not operate the appliance if it is damaged. The appliance must only be connected by an authorised specialist, paying attention to the relevant regulations of the power supply companies and the regional construction regulations. Observe the assembly instructions! The appliance co...

  • Page 7

    5 about use the appliance is intended solely for household use and must not be put to any other uses. Use the appliance to prepare meals only. Do not use the appliance to heat up the room in which it is installed. The appliance must not be operated empty. If the appliance is switched on empty, the t...

  • Page 8

    6 features special accessories 1 appliance cover 2 holding clip for frying basket holder 3 frying basket holder 4 minimum / maximum level marker 5 foaming edge 6 heating element (3 000 w) 7 control knob to select fat / oil / cleaning setting 8 temperature control knob you can order the following spe...

  • Page 9

    Operating principle the two marks on the rear of the deep fryer indicate the maximum and minimum levels for the deep-frying oil or fat. The oil/fat level should always be between the two marking lines. The food to be fried should always be completely covered by the deep-frying oil or fat; if this is...

  • Page 10

    8 switching on • open the appliance cover. Fit the frying basket holder into the two clips on the edge of the basin and secure the holder in the clamp on the cover. • fill the frying basin either with 3 - 3.5 l of heat- resistant oil (e.G. Peanut oil, palm oil or special deep frying oil) or 2.5 - 3 ...

  • Page 11

    Switching off fully turn the right control knob to the off position. Residual heat display after switching off the deep fryer, the luminous disc behind the right control knob will flash, as long as the appliance has not cooled down sufficiently to be touched safely. The appliance cover must not be c...

  • Page 12

    Visual signals 10 luminous disc luminous disc signification cause / remedy behind the left behind the right control knob control knob lights off appliance is switched off right control knob appliance is on normal use lights constantly flashing of appliance is normal use right control knob heating up...

  • Page 13

    11 4. Practical tips • the deep frying temperature range lies between 320 and 360 °f. The maximum temperature is 380 °f. • according to the general recommendations for healthy frying, a temperature of 350 °f should not be exceeded (see cooking table). There should be 100 g maximum of food per 1 litr...

  • Page 14

    12 5. Settings table item temperature quantity deep frying remarks (°f) time (min.) snacks and hors d'oeuvres camembert, breaded 300 2 7 - 8 spring rolls 320 4 - 6 5 - 7 depending on size pears filled with roquefort cheese 320 2 5 - 7 turn frequently flaky pasties (e.G. Filled with mushrooms, 350 4 ...

  • Page 15

    Do not use any abrasive and caustic cleaning agents (scouring or nitro polishing agents). Do not use any cleaning agents containig chloride (for example bleach), these can cause corrosion damage to the appliance. Do not use any abrasive sponges either. Clean the appliance and accessories thoroughly ...

  • Page 16

    The appliance must be disconnected from the power supply during all repair work. If the appliance does not function correctly, check the fuses first. If the power supply is functioning correctly, but your appliance still does not work, please contact your gaggenau dealer who will provide you with th...

  • Page 17

    Technical data total connected load: 3 000 w ac 208/220-240 v / 60 hz important notes on installation this appliance can be combined with all gaggenau vario 400 series appliances. Note: do not install the appliance directly next to a steam cooker! This appliance may be installed in kitchen combi- na...

  • Page 18

    Preparing the cabinet the minimum spaces that must be maintained between the appliance cooking surface and the horizontal surface above the cooking top shall be: a = 30 inches (762 mm) minimum clearance between the top of the cooking surface and the bottom of an unprotected wood or metal cabinet; or...

  • Page 19

    Preparing the cabinet • cut out the recess for one or several vario appliances in your worktop. Proceed as indicated on the installation sketch. The installation sketch contains the measurements of the space required for the trim between the appliances. Several appliances can also be installed in in...

  • Page 20

    Installing the control panel • before installation, remove all styrofoam packaging from the control knobs and peel off the protective film behind the luminous discs. • hold the support plate from the rear against the cabinet front, insert control knobs into the holes, secure from the rear with the n...

  • Page 21

    Installing the appliance fitting the appliance cover • firmly plug the connecting cable in the appliance and in the control panel (the plugs must lock into place). • turn the clamping screws to the side. Insert the appliance with the control panel on the front into the cut-out and align it. Note: do...

  • Page 24

    5551 mcfadden avenue huntington beach, ca 92649 usa y (800) 828-9165 · fax (714) 901-0979 www.Gaggenau-usa.Com gaggenau hausgerÄte gmbh carl-wery-str. 34 · 81739 mÜnchen germany y (089) 45 90-03 fax (0 89) 45 90-23 47.