1. DL manuals
  2. Gaggenau
  3. Kitchen Appliances
  4. VG 232 RK
  5. Operating And Assembly Instructions Manual

Gaggenau VG 232 RK Operating And Assembly Instructions Manual

Manual is about: Gas cooker

Summary of VG 232 RK

  • Page 1

    Operating and assembly instructions vg 232 rk gas cooker.

  • Page 2

    1 preface 1. Important notes page 3-4 1.1 for your safety page 3 1.2 operating for the first time page 3 1.3 about use page 4 2. Structure and operating principle page 5-6 2.1 structure page 5 2.2 special accessories page 5 2.3 operating principle page 6 3. Operation page 7 4. Cleaning and care page...

  • Page 3

    2 cooking with your new gas cooker will be even more fun than before. The appliance offers you the following advantages: – regulation from hot to cold in seconds. – high safety standard thanks to thermal protection elements for all burners. – thanks to the novel installation method implemented, inst...

  • Page 4

    1.1 for your safety you must not operate the appliance if it is damaged. When connecting electrical appliances in the proxi- mity of the appliance, make sure that connecting leads do not come into contact with hot cooking surfaces! As the user, you yourself are responsible for maintenance and proper...

  • Page 5

    1.3 about use the appliance is intended solely for use in the household and must not be put to any other uses. Use the appliance to prepare meals only. It must not be used to heat up the room in which it is installed. Use of a gas cooker generates heat and humidity in the room where it is installed....

  • Page 6

    2.1 structure 2.2 special accessories 1 high-power burner b 2.8 kw 2 normal burner a 1.9 kw 3 pot support 4 control knob for the front cooking position 5 control knob for the rear cooking position 6 burner cover 7 burner head 8 spark plug for automatic ignition 9 thermal sensor for flame monitor you...

  • Page 7

    2.3 operating principle the appliance features one-hand operation. That is to say, the ignition is activated when the control knob is pressed briefly. After igniting, keep the control knob pressed for around 5-8 seconds more because the heat sensor that opens the gas channel has to warm up first. Th...

  • Page 8

    The cooking positions must only be ignited when all burner parts are fitted. Otherwise, malfunctions may occur on the ignition unit. Switching on: – place a pot or a pan on the corresponding cooking position. – fully press in the control knob for the corresponding cooking position. This activates th...

  • Page 9

    Wipe off spilt food immediately , thus ensuring that it cannot burn in on the hob. Caution! The burner gets very hot during operation! Never use abrasive or caustic cleaning agents. You should only clean the control panel and the control knobs with detergent and a a soft cloth. To ensure perfect fun...

  • Page 10

    5.1 general 5.2 remedying slight malfunctions yourself in the event of malfunctions, check whether the gas and electricity supply is in proper working order, i.E. The gas valve is open and the plug has been plugged into the socket. If the power supply is functioning correctly, but your appliance sti...

  • Page 11

    Technical data (gas) burners: normal burner full burning 1.9 kw low burning high-intensity burner full burning 2.8 kw low burning gas connection: r 1/2’’ union nut for r 1/2’’ bracket to din 1999, conical-cylindrical technical data, gas technical data (electrical) rated consumption 0.8 w voltage 220...

  • Page 12

    11 7.1 important notes please observe the safety notes and the important notes (chapter 1). The installing technician is responsible for perfect functioning of the appliance at its installa- tion location. He must explain the operating principle to the user with reference to the operating instructio...

  • Page 13

    7.2 connecting the appliance gas connection the gas connection must be in a location that permits access to the shut-off valve and which, if applicable, is visible after opening the door of the furniture item. By means of the included r 1/2" connection bracket (on the appliance end) with the affilia...

  • Page 14

    7.3 nozzle replacement changing over to a different gas type only authorised specialists are permitted to change over to a different gas type. The nozzles needed for the gas type to be set are available as a conversion kit. Please specify the appliance type and the required gas type. Nozzles can be ...

  • Page 15

    Replacing the main nozzle 2 proceed as follows: – the main nozzle 2 is visible after detaching the burner cover (see fig. 9). It is unscrewed with a special screw key. – unscrew the nozzle and insert the new nozzle as specified in the main nozzle table. The nozzle must be screwed in fully and firmly...

  • Page 16

    5080006282ind01 en 06.03 sk 15 7.4 installing the appliance – produce the recess for one or several vario appliance(s) in your worktop . Proceed as indicated on the installation sketch and the dimension table. The dimension table contains details of the space requirement for the trim between the app...

  • Page 17

    Gaggenau hausgerÄte gmbh p.O. Box 10 02 50 · 80076 mÜnchen germany y (0 89) 45 90-03 fax (0 89) 45 90 - 23 47 www.Gaggenau.Com.