Instructions mode d’emploi lnstrucciones de.
Read this first! For makers before making espresso the first time, you must prime the pump! Here’s how to do it: 1. Plug the electrical cord into a live outlet. 2. Fill the water reservoir. (filtered water is better.) 3. Place an empty filter into the black handled filter holder. 4. Attach the filte...
8. The pump sound will change in a few seconds and espresso will start to flow into the cups. 9. When the streams of espresso turn light in color, turn off the “coffee” switch. 10. You may now remove the cups of espresso and serve them. 11. Before making more espresso, remove the filter holder and k...
Important safeguards when using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following: 1. 2. 3. 4. 5. 6. Read all instructions and informa- tion in this instruction book and any other li...
Description of parts: 1. 2. 3. 3a 4. 5. 6. 7. 8. On-off switch power-on light hot water/brew switch (pump) temperature ready-light steam switch (temperature) reservoir cover removable water knob steam/hot water knob turbo frother steam nozzle veable) 9. Filterholder filter basket 1 or 2 cups 10. Dri...
Introduction: as the proud owner or the gaggia espresso, you can now experience the taste of a delicious cup of espresso or cappuccino in the comfort of your own home. Congratulations on making a wise decision! Espresso coffee, originally created in italy, is made by rapidly forcing water that has b...
Preparation: 1. Remove the water reservoir cover (5) and fill with cold water to the max line indicated on reservoir (6). For best taste, the use of bottled water is recommended. The water reservoir (6) can be removed by sliding it forward and then filling it. Important: when replacing reservoir, be...
3. Select the correct filter basket and insert it in the filter holder (9). Use the small filter basket for 1 cup and the large filter basket for 2 cups of espresso. Then.Insert the filter holder (9) into the brew head to warm-up. 4. After the warm-up period, remove the warm filter-holder (9) from t...
4. Slowly turn steam valve knob (7) counter clockwise to release steam. Important: the more you turn the knob, the greater the steam pressure for frothing. 5. Move pitcher in circular motion keeping the tip of steam nozzle just under surface of milk as it begins to froth. Do not let milk come to a b...
2. 3. 4. 5. 6. 7. 8 cloth. Hole in steam nozzle must be kept open. A needle may be used. Clean filter holder and filter basket in warm water after use. Wipe body of machine with a damp cloth asrequired. Remove drip tray and plate (10, and wash in warm soapy water. Use sponge to clean out drip area. ...
