GAI-Tronics 701-305 Quick Manual

Pub.  42004-365B 

GAI-Tronics Corporation  400 E. Wyomissing Ave.  Mohnton, PA  19540  USA 

610-777-1374  

„  800-492-1212  „  Fax:  610-796-5954 

V

ISIT WWW

.

GAI

-

TRONICS

.

COM FOR PRODUCT LITERATURE AND MANUALS

G A I - T R O N I C S ®   C O R P O R A T I O N  

A   H U B B E L L   C O M P A N Y  

Model 701-305 

Handset/Speaker Amplifier 

Confidentiality Notice 

This manual is provided solely as an operational, installation, and maintenance guide and contains 

sensitive business and technical information that is confidential and proprietary to GAI-Tronics.  

GAI-Tronics retains all intellectual property and other rights in or to the information contained herein, 

and such information may only be used in connection with the operation of your GAI-Tronics product or 

system.  This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any 

third party. 

General Information 

The Model 701-305 Handset/Speaker Amplifier is an important component of the 700 Series Page/Party

®

system.  The plug-in handset/speaker amplifier mates directly with the Page/Party

®

 Series amplifier 

enclosures and is suitable for indoor or outdoor use. 

Installation 

CAUTION

Do not install this equipment in hazardous areas or areas other than those on the equipment 

approval list in the “Specifications” section.  Such installation may cause a safety hazard and 

consequent injury or property damage. 

WARNING

Do not disconnect equipment while circuit is energized. 

The Model 701-305 Handset/Speaker Amplifier plugs directly into the enclosure.  The following figure 

shows installation and adjustment details.  Please refer to it when you are installing and adjusting the 701 

Series amplifiers. 

For continued IP 66 protection, torque setting for securing the amplifier to the enclosure should be 10 to 

12 in-lbs. or 1.13 to 1.36 n-m.