GAI-Tronics 723-003 Quick Manual

Pub.  42004-259C 

GAI-Tronics Corporation  400 E. Wyomissing Ave.  Mohnton, PA  19540  USA 

610-777-1374  

„  800-492-1212  „  Fax:  610-796-5954 

V

ISIT WWW

.

GAI

-

TRONICS

.

COM FOR PRODUCT LITERATURE AND MANUALS

G A I - T R O N I C S ®   C O R P O R A T I O N  

A   H U B B E L L   C O M P A N Y  

Model 723-003 24 V DC 

Remote Handset/Speaker Amplifier 

Confidentiality Notice 

This manual is provided solely as an operational, installation, and maintenance guide and contains 

sensitive business and technical information that is confidential and proprietary to GAI-Tronics.  GAI-

Tronics retains all intellectual property and other rights in or to the information contained herein, and 

such information may only be used in connection with the operation of your GAI-Tronics product or 

system.  This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any 

third party. 

General Information 

The Model 723-003 24 V DC Remote Handset/Speaker Amplifier is an important component of the 

Page/Party

®

 communications system and an integral part of GAI-Tronics desktop, desk-edge, and flush-

mount stations.  It has been designed to be remotely mounted within an enclosure, allowing the 

associated subsets to be placed on a desktop, mounted on the side of a desk, or to be flush mounted.  The 

Model 723-003 Remote Handset/Speaker Amplifier is constructed of fabricated steel durable enough for 

even the toughest industrial environments. 

Installation 

WARNING

  Explosion Hazard – Substitution of components may impair suitability for 

Class 1, Div. 2 usage. 

CAUTION

Do not install this equipment in hazardous areas or areas other than those indicated on the 

equipment approval list in the “Specifications” section of this manual.  Such installation may cause 

a safety hazard and consequent injury or property damage. 

To install the remote handset/speaker amplifier, plug the amplifier into the appropriate enclosure, and 

tighten the four screws in the corners of the amplifier.  See Figure 1 for typical installation details.