GAI-Tronics 751-005 Quick Manual

Pub.  42004-366B 

GAI-Tronics Corporation  400 E. Wyomissing Ave.  Mohnton, PA  19540  USA 

610-777-1374  

„  800-492-1212  „  Fax:  610-796-5954 

V

ISIT WWW

.

GAI

-

TRONICS

.

COM FOR PRODUCT LITERATURE AND MANUALS

G A I - T R O N I C S ®   C O R P O R A T I O N  

A   H U B B E L L   C O M P A N Y  

Model 751-005 

Speaker Amplifier 

Confidentiality Notice 

This manual is provided solely as an operational, installation, and maintenance guide and contains 

sensitive business and technical information that is confidential and proprietary to GAI-Tronics.  

GAI-Tronics retains all intellectual property and other rights in or to the information contained herein, 

and such information may only be used in connection with the operation of your GAI-Tronics product or 

system.  This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any 

third party. 

General Information 

The Model 751-005 Speaker Amplifier is a component of the 700 Series Page/Party

®

 System.  It mates 

directly with the Page/Party

®

 series enclosures and broadcasts page announcements over the Page/Party

®

system speakers.  The Model 751-005 is constructed of 16-gauge cold-rolled steel and is suitable for 

either indoor or outdoor use. 

Installation 

CAUTION

  Do not install this equipment in hazardous areas or areas other than those on 

the equipment approval list in the “Specifications” section.  Such installation may cause a safety 

hazard and consequent injury or property damage. 

WARNING

Do not disconnect equipment while the circuit is energized. 

For continued IP 66 protection, torque setting for securing the amplifier to the enclosure should be 10 to 

12 in-lbs. or 1.13 to 1.36 n-m.  To install, plug the Model 751-005 Speaker Amplifier into the appropriate 

enclosure, and tighten the four screws in the corners of the front panel.  Refer to Figure 1 for typical 

installation details.