1. DL manuals
  2. GAI-Tronics
  3. Telephone
  4. KETS 1141
  5. Installation And User Manual

GAI-Tronics KETS 1141 Installation And User Manual

Manual is about: Titan Illuminated Crossing Telephone

Summary of KETS 1141

  • Page 1

    Doc. No. 502-20-0140-001 iss1. Feb 2013. (cn35676-010) installation and user guide kets 1141 titan illuminated crossing telephone warning this telephone requires a specific set up procedure, detailed in this manual. Phones may fail to operate if not set up correctly on installation. Gai-tronics 1 2 ...

  • Page 2

    2 kets 1141 titan illuminated crossing telephone.

  • Page 3: Contents

    Kets 1141 titan illuminated crossing telephone 3 contents 1. Safety and care information ....................................................................... 4 2. Product description .................................................................................... 4 2.1. At a glance .............

  • Page 4: 2.  Product Description

    4 kets 1141 titan illuminated crossing telephone 1. Safety and care information ▲ this telephone is for the kets (kestrel emergency telephone system) only. Do not attempt to connect this telephone to a pabx or pstn line or to pets. ▲ the safety of the user/installer relies on the isolation of the te...

  • Page 5

    Kets 1141 titan illuminated crossing telephone 5 2.1. At a glance 1 2 3 press lift handset press button wait for answer door handset pushbutton faceplate illuminated panel kets product identity label (brown).

  • Page 6: 3.  Kets System Summary

    6 kets 1141 titan illuminated crossing telephone 3. Kets system summary kets is an "omnibus" system, meaning that all the telephones are connected in parallel on a single cable pair from the crossing to the concentrator. In practice all the phones at a crossing are connected into a line termination ...

  • Page 7: 5.  Operation / Testing

    Kets 1141 titan illuminated crossing telephone 7 always check the function of all kets phones after any replacement has been made. If any individual phone does not perform as expected, it is usually because the above procedure has not been followed. In this case follow these steps to recover: • disc...

  • Page 8: 6.  Installation

    8 kets 1141 titan illuminated crossing telephone 6. Installation 6.1. General important all possible measures must be taken to ensure water, fluid or dust does not contaminate the internal components of the telephone whilst unpacking, preparing and installing the telephone in inclement weather condi...

  • Page 9

    Kets 1141 titan illuminated crossing telephone 9 1. Remove the red blanking plug leaving the other (usually black) in place. 2. Select the appropriate sized gland: use the smaller gland for cables diameters 4 - 7mm. Use the larger gland for cable diameters 8 - 13mm. 3. From the outside of the case, ...

  • Page 10

    10 kets 1141 titan illuminated crossing telephone warning:.Your warranty will be invalidated if :- 1. Any fixing hole made in the rear enclosure is left unused. 2. Any additional holes are drilled into the telephone enclosure. 3. Plastic bushes are not used on all fixing holes. 2. Mark the wall with...

  • Page 11

    Kets 1141 titan illuminated crossing telephone 11 kit no 100-02-0208-001 this accessory is for mounting gai-tronics telephones on to the side of round poles of 100mm to 200mm diameter, or on to square or rectangular section uprights of 100mm to 150mm across the mounting surface. Note: banding straps...

  • Page 12: 7.  Connections

    12 kets 1141 titan illuminated crossing telephone 7. Connections if glands are used, insert the cable through the gland body and tighten the gland nut sufficiently to clamp the cable, making a seal. Ensure sufficient cable is left to allow removal of the faceplate without straining the cable. Import...

  • Page 13: 8.  Legend Panel.

    Kets 1141 titan illuminated crossing telephone 13 8. Legend panel. The telephone is designed to accept a legend panel, giving details of the level crossing. The legend panel slides into a thin slot behind the faceplate and is held in place when the faceplate is secured in the rear enclosure. The leg...

  • Page 14: 9.  Cleaning

    14 kets 1141 titan illuminated crossing telephone 8.2. Fitting the legend panel. To fit the legend panel, first ensure that a panel has been correctly printed and cut to size according to the template above. Remove the faceplate from the telephone by removing the 4 retaining screws. Locate the slot ...

  • Page 15: 10.  Aftercare

    Kets 1141 titan illuminated crossing telephone 15 10. Aftercare the purchase of your gai-tronics product does not end our commitment to you. In addition to our warranty obligations, gai-tronics are able to offer various levels of maintenance packages, installation and commissioning packages and tech...

  • Page 16

    16 kets 1141 titan illuminated crossing telephone 11. Technical specifications operational requirements systems. • kestrel emergency telephone system (kets) only. Not suitable for connection to: • public networks (pstn) • standard pabxs • pets telephone line parameters • on-hook current: 3.5ma ± 10%...

  • Page 17

    Kets 1141 titan illuminated crossing telephone 17 compliance to standards european directive 2004/108/ec – emc directive 2006/95/ec – low volltage directive (lvd) 2011/65/ec - restriction of the use of certain hazardous substances in electrical and electronic equipment (recast) (rohs 2) directive em...

  • Page 18: 12.  Ce Declaration

    18 kets 1141 titan illuminated crossing telephone 12. Ce declaration.

  • Page 19

    Kets 1141 titan illuminated crossing telephone 19.

  • Page 20: Gai-Tronics

    20 kets 1141 titan illuminated crossing telephone gai-tronics a division of hubbell ltd. Brunel drive stretton park burton on trent de13 0bz england tel: 01283 500500 fax: 01283 500400 www.Gai-tronics.Co.Uk the policy of gai-tronics is one of continuous improvement, therefore the company reserves th...