- DL manuals
- GAI-Tronics
- Telephone
- Titan Illuminated Crossing Telephone
- Installation And User Manual
GAI-Tronics Titan Illuminated Crossing Telephone Installation And User Manual
Summary of Titan Illuminated Crossing Telephone
Page 1
Installation and user guide titan illuminated crossing telephone.
Page 3
Titan illuminated crossing telephone 1 contents 1 pre-installation......................................................................................... 3 1.1 ringer equivalence number (ren) ................................................. 3 1.2 suitability for use .................................
Page 4: Important
Titan illuminated crossing telephone 2 important all possible measures must be taken to ensure water, fluid or dust does not contaminate the internal components of this telephone whilst unpacking, preparing and installing it in inclement weather conditions or by negligence. Failure to carry out this...
Page 5
Titan illuminated crossing telephone 3 1 product description the crossing telephone is a metal-bodied, weather resistant telephone designed for connection to pets. Features include: • cb operation only – lift handset to loop line – no dialling is possible. • illuminated legend panel and switch. • se...
Page 6
Titan illuminated crossing telephone 4 2.2 suitability for use crossing telephones are suitable for connection to either loop disconnect or multifrequency (tone) dialling telephone lines. Connection may not be made to shared service (party) lines. The telephone is not suitable for connection to a pa...
Page 7: 3.1
Titan illuminated crossing telephone 5 3 installation important all possible measures must be taken to ensure water or fluid does not contaminate the internal components of the telephone whilst unpacking, preparing and installing the telephone in inclement weather conditions or by negligence. Failur...
Page 8
Titan illuminated crossing telephone 6 figure 4 – gland fitting 2. Select the appropriate sized cable gland provided: use the smallest gland for cables diameters 4 - 7mm. Use the largest gland for cable diameters 8 - 13mm. Figure 5 – threading the cable 3. Insert the selected gland into the threaded...
Page 9
Titan illuminated crossing telephone 7 figure 7 – knocking out plastic bushes 4. Ensuring that the cable entries are at the bottom, offer the rear enclosure up to a vertical surface and mark through the punched holes. Do not use the backplate as a template to drill the holes, work only from the mark...
Page 10
Titan illuminated crossing telephone 8 figure 9 – gland assembly important: if only one gland entry is used, the blanking plug fitted to the second gland position must be left in place. 3.2 pole mounting kit no 100-02-0208-001 for mounting telephones on to the side of round poles of 100mm to 200mm d...
Page 11
Titan illuminated crossing telephone 9 4. Make the necessary connections 5. Secure the telephone front plate to its rear enclosure,. 6. Offer the complete telephone up to the required mounting location. 7. Pass a proprietary banding strap round each of the pole mounting clamps and support pole. 8. T...
Page 12
Titan illuminated crossing telephone 10 note: the cable gland must be fully tightened before the rear enclosure is secured to the mounting bracket as there is insufficient access to the gland afterwards. 6. Attach the base to the mounting bracket using the four m6 x 25 screws supplied (5mm socket wr...
Page 13
Titan illuminated crossing telephone 11 4 approvals this mark indicates compliance with the european r&tte directive 1999/5/ec the telephone is suitable for inductively coupling to hearing aids having a `t' switch position in accordance with the relevant oftel code of practice. Use of this facility ...
Page 14
Titan illuminated crossing telephone 12 gai-tronics limited brunel drive stretton park burton upon trent staffordshire de13 0bz www.Gai-tronics.Co.Uk tel: +44 (0)1283 500 500 fax: +44 (0)1283 500 400 if you have any difficulties, please call. The policy of gai-tronics is one of continuous improvemen...