Summary of G+ HOME HUB
Page 1
G+ home hub user guide.
Page 3
Welcome to the easier way to access your home.
Page 4: G+ Home Hub.
This guide will show you how to install your g+ home hub. G+ home hub mounting bracket what’s in your g+ home hub box? This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have b...
Page 5: Contents
Contents section 1 overview .................................................................................................................2 applications 2 non g+ control systems 3 feedback 4 layout ......................................................................................................
Page 7
1 overview, layout, communication overview.
Page 8
2 section 1 overview overview the g+ home hub is an electrically powered device used within the g+ access system to enable non g+ systems to control g+ devices. The g+ home hub is wired to a non g+ control system to: • receive input commands from the non g+ control system • send status of (receive f...
Page 9
3 section 1 overview non g+ control systems examples of suitable* systems that could activate a g+ home hub include: • home automation systems • building access systems * a suitable system is one that activates the g+ home hub by a voltage free switch. Note: the installer is responsible for ensuring...
Page 10
4 section 1 overview feedback the g+ home hub is capable of sending information about the status of the device it is controlling to the non g+ controller, if this information exists. In this manual this information is referred to as feedback. Examples of feedback include: • from the electric g+ lock...
Page 11
5 connections when controlling an electric g+ lockset section 1 layout layout input – deadlock feedback – passage programming connector feedback – door closed input – privacy input – passage power feedback – deadlock feedback – privacy.
Page 12
6 section 1 layout connections when controlling 3 x g+ smart boxes with feedback layout input – g+ smart box 1 power programming connector feedback – g+ smart box 2a feedback – g+ smart box 3b feedback – g+ smart box 2b feedback – g+ smart box 3a input – g+ smart box 2 feedback – g+ smart box 1a inp...
Page 13
7 section 1 communication overview communication overview battery g+ lockset receives commands from the g+ home hub electric g+ lockset receives commands from the g+ home hub can send feedback to the g+ home hub up to 3 x g+ smart boxes receives commands from g+ home hub can send feedback to the g+ ...
Page 15
2 installation, wiring and setup.
Page 16
10 section 2 installation installation location the g+ home hub is to be installed in a secure, dry environment out of direct sunlight. Do not install the g+ home hub in a metal box as this will severely interfere with rf reception and transmission. Mounting instructions the installer should conside...
Page 17
11 section 2 installation step 3: connect wiring see section 2 – wiring instructions guidelines (page 12-16) step 4: snap on protective cover 3 4.
Page 18
12 input (from controlling devices) function overview the g+ home hub has 3 inputs that control the following: in the case of a g+ lockset: – input 1: deadlock mode – input 2: privacy mode – input 3: passage mode or – input 1: a g+ smart box or g+ enabled gliderol garage door – input 2: a g+ smart b...
Page 19
13 possible scenarios section 2 wiring 1 feedback device non feedback device input 1 electric g+ lockset deadlock g+ smart box connected to a light input 2 electric g+ lockset privacy – input 3 electric g+ lockset passage g+ smart box connected to a gate 3 feedback device non feedback device input 1...
Page 20
14 outputs / feedback (from controlled devices) typical wiring inputs to the g+ home hub are activated by the non g+ controlling device by closing voltage free switches. The inputs will only respond once per activation i.E. The g+ home hub will only send one command to the powered g+ lockset or g+ s...
Page 21
15 section 2 wiring typical wiring for an electric g+ lockset door closed output passage output privacy output deadlock output also note that for an electric g+ lockset: • it is possible to have both the privacy and deadlock outputs activated at the same time. • if the door is open, or the power to ...
Page 22
16 typical wiring for 3 x g+ smart boxes the illustration below shows 3 x g+ smart boxes wired normally open. All outputs could be wired normally closed. Section 2 wiring power this appliance shall only be supplied at safety extra low voltage corresponding to the marking on the appliance. Connection...
Page 23
17 section 2 setup setup programming contact a gainsborough hardware licensed locksmith / installer to program a g+ home hub to another g+ device..
Page 25
3 general specifications.
Page 26
20 section 3 general specifications general specifications electrical specification power via plug pack supplied 240v 50/60hz ac power in direct wiring 12v/24v 50/60hz 0.25a ac 12v/24v 0.25a dc input voltage free contacts / dry contacts output switch rating voltage free contacts / dry contacts outpu...
Page 27
This document contains general information only and is in no way to be regarded as a complete and comprehensive guide. Gainsborough hardware industries limited acn 004 792 269 (gainsborough hardware) makes no representation about the content and suitability of this information for any purpose. You s...
Page 28
Gainsborough hardware industries limited hotline 13 14 18 head office 31–33 alfred street blackburn, vic 3130 po box 330, blackburn vic telephone 03 9877 1555 admin & export fax +61 (0)3 9894 1599 email sales@gainsboroughhardware.Com.Au www.Gainsboroughhardware.Com.Au nsw suite 1b, 126 taren point r...