Galanz W45A1A401L Service Manual - page 10
Dishwasher
Edition: 2015-06 Model: W45A1A401L
Page 10 / 27
Rattling sound can be heard while washing is taking place
Crockery has not been stacked properly inside the appliance.
Knocking sound coming from inlet valves
This is caused by the way the water pipes have been laid and it has no effect upon
the way the appliance functions. There is no remedy for this.
...with the dishes, cutlery, etc.
Remnants of food are stuck to the dishes, cutlery ,etc.
--Dishwasher was not loaded properly. Jets of water could not reach all parts of
the dishes, etc.
--Too many items in the rack.
--Items in the rack were touching each other.
--Not enough detergent was added to dispenser.
--Selected wash program was not intensive enough.
--Rotation of spray arm was obstructed by dishes, etc.
--Nozzles in spray arm are blocked by remnants of food.
--Filters are blocked.
--Filters have been incorrectly fitted.
--Waste-water pump is jammed.
Plastic items are discoloured
--Not enough detergent was added to dispenser.
--Detergent has insuffcient bleaching properties. Use a detergent containing a
chemical bleaching agent.
White stains are left on crockery, glasses have a milky appearance
--Not enough detergent was added to dispenser compartment.
--Amount of rinse-aid was set too low.
--Although water is quite hard, no salt has been put in appliance.
--Lid on salt container is not screwed tight.
--If you used a phosphate-free detergent , try a detergent containing phosphates
and compare results.
Dishes,cultlery,etc.have not been dried
--Selected program did not include drying function.
--Amount of rinse-aid was set too low.
--Items were removed from dishwasher too soon.
Glasses have a dull appearance
--Amount of rinse-aid was set too low.