Summary of 18
Page 1
Galaxy 8/18/60/500/512 user guide 9 # 3 6 8 0 2 5 7 1 4 a ent esc b galaxy 512 v1.15 11:42 tue 11 oct.
Page 3: Table of Contents
Galaxy 8/18/60/500/512 iii user guide table of contents introduction ------------------------------------------------------------------- v keypad information ---------------------------------------------------------- 1 setting the system ---------------------------------------------------------- 3 b...
Page 4
User guide iv galaxy 8/18/50/500/512 log ----------------------------------------------------------------------- 12 all ------------------------------------------------------------------------- 12 walk test -------------------------------------------------------------------- 13 all zones -----------...
Page 5: Introduction
Galaxy 8/18/60/500/512 v user guide introduction your galaxy alarm system is, in fact, a computer which has been designed using the latest software and hardware technology. First and foremost, the galaxy meets all your security needs. The engineer will program and commission the system to your own e...
Page 6: Keypad Information
Galaxy 8/18/60/500/512 1 user guide keypad information general the galaxy alarm system is controlled by the galaxy mk3 liquid crystal display (lcd) keypads. There can be a maximum of 16 keypads attached to the galaxy 8, 18 and 60 and a maximum of 32 keypads attached to the galaxy 500 and 512 control...
Page 7: Enter Key (Ent)
User guide 2 galaxy 8/18/60/500/512 enter key (ent) user level 3 and above to enter codes, data or selections into the system. User level 2 to set and unset the system. User level 1 to set the system. User level 0 to log pin entries. Escape key (esc) the esc key aborts the current option to return t...
Page 8: Setting The System
Galaxy 8/18/60/500/512 3 user guide setting the system before setting before setting the system ensure all doors and windows are secured and areas protected by movement detectors are free from obstruction. Entering a pin - user level 1-2 as each digit is entered the keypad responds with a bleep and ...
Page 9: Sounder
User guide 4 galaxy 8/18/60/500/512 sounder during the setting period the sounder emits a continuous tone if all of the zones are closed. If a zone is opened during the setting period, the sounder begins to pulse. The sounder also pulses during the last 25% of the setting time to indicate time runni...
Page 10: Unsetting The System
Galaxy 8/18/60/500/512 5 user guide unsetting the system normal entry unsetting starts immediately when the final door is opened or an entry zone is activated. The sounder pulses slowly and the user must go directly to the keypad and enter a valid pin, followed by a>,b or ent. Users with group optio...
Page 11: Menu Options
User guide 6 galaxy 8/18/60/500/512 menu options there are two menu structures on the galaxy control panels: full menu only accessed by default by the manager code on the galaxy 60, 500 and 512 control panels. Quick menu a selection of options from the full menu. The quick menu is the default menu a...
Page 12: Quick Menu Options
Galaxy 8/18/60/500/512 7 user guide quick menu options n o it p o u n e m k c i u q . O n u n e m ll u f . O n u n e m r e s u l e v e l s e n o z ti m o 0 1 1 3 t e s d e c r o f 1 4 1 3 e m i h c 2 1 2 4 s e n o z y a l p s i d 3 1 2 4 g o l y a l p s i d 4 2 2 4 t n ir p 5 4 2 4 t s e t k l a w 6...
Page 13
User guide 8 galaxy 8/18/60/500/512 omit zones (user level 3 and above) purpose this option allows the user to omit zones before setting the system. Zones must be eligible for omission otherwise they will not be displayed. Note: zones remain omitted for one set period only. Selecting omit zones ente...
Page 14
Galaxy 8/18/60/500/512 9 user guide vibration zones if the omitted zone is a vibration zone, then all zones of this type (in all groups) will be block omitted. The vibration zones remain omitted until manually reinstated. Unsetting the system does not reinstate vibration detectors. Atm 1/2/3/4 zones...
Page 15
User guide 10 galaxy 8/18/60/500/512 chime (user level 3 and above) purpose the chime mode is switched on and off by this option. When the chime mode is on, any zones that have been programmed by the engineer for chime will activate momentarily when opened. Note: your system may not require any zone...
Page 16
Galaxy 8/18/60/500/512 11 user guide status the current status of the zone is displayed as circuit information, e.G. Open or closed. This information alternates with function informa- tion. Description the zone description, if programmed, is displayed on the bottom line of the display. The descripto...
Page 17
User guide 12 galaxy 8/18/60/500/512 viewing each event the entire events of any one date can be viewed by progressively stepping through the events using the a> and view keys. Additional information the # key can be used to reveal additional information on some types of events. This information is ...
Page 18
Galaxy 8/18/60/500/512 13 user guide help message if a print-out is started without a printer being connected and on-line, the display indicates that the printer is off-line. Walk test (user level 5 and above) purpose the walk test option provides a method of testing the zones to ensure that they ar...
Page 19: Time/date (User Level 6)
User guide 14 galaxy 8/18/60/500/512 time/date (user level 6) purpose the time/date option allows the user to modify both the time (hours/minutes) and the date (day/month/year). Selecting time/date enter the quick menu. Press key 7 followed by the ent key. Once the time/date option has been selected...
Page 20
Galaxy 8/18/60/500/512 15 user guide 2. Pin warning available only on the galaxy 500 and 512. This option deter- mines the warning period given to users prior to programmed pin change date. Note: the valid period for pin change codes is programmed by the installation engineer. 3. Max users this opti...
Page 21
User guide 16 galaxy 8/18/60/500/512 modify pin the modify pin option allows a pin to be assigned to a user or an existing pin to be modified. The pin must be a four, five or six digit number that is unique to the system. If a duplicate pin is assigned, the message invalid selection is displayed. As...
Page 22: Table 2. User Access Levels
Galaxy 8/18/60/500/512 17 user guide modify level each user is assigned an access level which determines the menu options available to the user (see p.7, table 1. Menu options). On selecting this option, enter the level to be assigned to the user and press the ent key to accept the programming and r...
Page 23
User guide 18 galaxy 8/18/60/500/512 • quick menu all user codes default to the quick menu. This menu is made up of a selection of ten options (0 – 9) from the menu options 11 – 68. The user code level controls access to the quick menu. Any user can be upgraded from the quick menu to the full menu b...
Page 24
Galaxy 8/18/60/500/512 19 user guide 1=timer a, 2=timer b or 3= timer a+b is entered out with the assigned times, an illegal code event is recorded in the log and any outputs programmed as illegal code are activated. Temporary codes (galaxy 500 & 512) temporary codes allow a pin to be temporarily al...
Page 25
User guide 20 galaxy 8/18/60/500/512 modify groups (galaxy 18, 60, 500 and 512) this option determines the system groups that the user has access to and operational control over. The modify groups option is only available when the group mode has been enabled by the engineer. The system defaults to g...
Page 26
Galaxy 8/18/60/500/512 21 user guide • single groups a user can be assigned to any single group. In this case a user can only access, set and unset the single group. • multiple groups users can be allocated to more than one group in which case access and operation are collective. The user cannot cho...
Page 27
User guide 22 galaxy 8/18/60/500/512 max function the max card can be assigned to a single menu option. The user must be authorised to access the menu option, either by the user level assigned or by having the menu option access level changed by the engineer. The default option is not used. A new op...
Page 28
Galaxy 8/18/60/500/512 23 user guide pin warning this option determines the number of days notification before the expiry date of any user codes programmed as pin change. During the notification period, the user is prompted to enter a new code on entry of the expiring pin. The default period is 99 d...
Page 29: Summer (User Level 6)
User guide 24 galaxy 8/18/60/500/512 groups this option assigns group access to the max user. The max user must be assigned a group that is common to the max moduleto permit the access control functions to operate. If the max user does not have access to the group assigned to the module, the access ...
Page 30: Avoiding False Alarms
Galaxy 8/18/60/500/512 25 user guide avoiding false alarms false alarms are inconvenient and may be costly. Police can withhold response from consistent offenders. Here are nine points to help avoid false alarms. 1. Be sure you fully understand how to operate the alarm system. In your absence someon...
Page 31: Zone Reference Tables
User guide 26 galaxy 8/18/60/500/512 o i r - - - - - - - - - - - - - - - - - - - - - - - - e n o z n o i t c n u f n o i t p i r c s e d e m i h c t i m o t r a p 1 2 3 4 5 6 7 8 o i r - - - - - - - - - - - - - - - - - - - - - - - - e n o z n o i t c n u f n o i t p i r c s e d e m i h c t i m o t r...
Page 32: Alarm and Help Messages
Galaxy 8/18/60/500/512 27 user guide alarm and help messages other keypad in use (galaxy 8 and 18 only) this message advises the user that the system is already in use. The galaxy 8 and 18 allow only one user at a time. Alarm in progress the system is currently in alarm condition and must be cancell...
Page 33: Installer Details
User guide 28 galaxy 8/18/60/500/512 name: ----------------------------------------------------------------------------------- address: --------------------------------------------------------------------------------- ----------------------------------------------------------------------------------...
Page 34
Galaxy 8/18/60/500/512 29 user guide.
Page 35
User guide 30 galaxy 8/18/60/500/512.