Galaxy Aqua 4000 Installation Instructions Manual

Summary of Aqua 4000

  • Page 1

    Important! This step-by-step guide should be given to the customer after installation and demonstration. Aqua 4 4000 000 4 4000 000 i i s & instantaneous electric shower installation instructions technical hotline telephone: 0844 372 7766 fax: 0844 372 7767 email: technical-services@applied-energy.C...

  • Page 2

    Aqua 4000 6 5 7 4 3 8 9 10 2 1 temperature low cold stop high pressure low auto reset 6 9 0 m m 3 3 9 m m 218 mm pack contents shower unit showerhead flexible hose slider rail tube slider rail brackets slider rail showerhead holder soap dish screw pack important 1. Shower installation must be carrie...

  • Page 3

    Remove the two screws securing the shower unit cover and remove the cover complete with the control knobs. Place the shower unit on the wall and mark the location of the fixing screws through the back plate. Carefully drill the holes as marked using a sharpe 5.5mm masonry drill. Avoid connecting the...

  • Page 4

    Max cable run kw rating nominal at 240v min rating of isolating switch fuse rating 6mm 10mm 7.0 29.10amps 30 amps 30 amps 29m 48m 7.5 31.25amps 40 amps 40 amps 27m 44m 8.0 33.33amps 40 amps 40 amps 25m 42m 8.5 35.41amps 40 amps 40 amps 23m 38m 9.5 39.58amps 40 amps 40 amps 21m 32m 10.5 43.75amps 45 ...

  • Page 5

    9. Slide the end cap onto the mounting brackets. 10. Snap the soap dish onto the rail below the holder assembly. 11. Slide soap dish down the rail to required position. 12. Firmly attach flexible hose to the showerhead making sure sealing washer is in place. Note the adjustable slider grips the coni...

  • Page 6

    Of water and increase the shower temperature to decrease the shower temperature turn the temperature control knob anti-clockwise, this will increase the flow of water and decrease the shower temperature. 5. To turn off the shower unit press the stop button. 6. Remember! Water will continue flow for ...