- DL manuals
- Galaxy Audio
- Speakers
- HS7
- User Manual
Galaxy Audio HS7 User Manual
Summary of HS7
Page 1
User guide hs7 (hot spot 7) , ms5 (micro spot 5) , mspa5 (powered micro spot 5) , pa6s (powered hot spot) , nspa (powered nano spot) ® http://www.Galaxyaudio.Com/hotspots.Php.
Page 3: Table Of Contents
Table of contents important safety instructions.......................................1 welcome................................................................................... 2 before you begin...................................................................2 ohm’s law and the hot spot...........
Page 4
1 important safety instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's ins...
Page 5: Before You Begin
2 before you begin before using this product be sure to read and understand all instructions in this manual pertaining to the model(s) you have purchased. Do... Read this manual use a unidirectional microphone handle with care complete the registration card at the back of the manual don’t... Expose ...
Page 6: Example 1:
3 z= z x z 1 2 z + z 1 2 where z1 is the impedance (or ohm rating) for the first speaker, z2 for the second, and so on, for every speaker in the chain. This equation calculates the total impedance of the speaker system, which should not be lower than the minimum impedance rating of the amplifier. Ex...
Page 7: Example 2:
4 affect the quality and volume of the sound. If you are having problems with any of these applications use galaxy audio’s cricket polarity and continuity test set to check the polarity of your cables. Example 2: as long as all of the speakers have the same impedance rating, the equivalent impedance...
Page 8: Sound Reinforcement Basics
5 sound reinforcement basics avoiding feedback feedback (the shriek sometimes emitted by pa systems) occurs when the microphone (or pickup) and speaker are positioned too close together for a given level of volume. Once feed back occurs, it will continue until either the volume is decreased or the m...
Page 9: Ms5
Unpowered hot spot 7 (hs7)/micro spot (ms5) the hot spot was created as the solution to the problem of musicians and public speakers not being able to hear themselves while performing. The hot spot's design is unsurpassed in efficiently reproducing the crucial vocal range frequencies. The hs7 & pa6s...
Page 10: Note:
Position full clockwise 2nd 3rd 4th 5th 6th 7th impedance 16 ohms 23 ohms 33 ohms 46 ohms 64 ohms 90 ohms 130 ohms db reduction 0 -3 -6 -9 -12 -15 -18 the hot spot 7 (hs7) and micro spot (ms5) the impedance of the hot spot 7 (hs7) and micro spot (ms5) is determined by the position of its volume cont...
Page 11: Pa6S/pa6Sr & Nspa
8 pa6s/pa6sr & nspa features of the galaxy audio pa6s/pa6sr · ultra light weight/high power design · special design woofer and tweeter for full range sound · two channels with xlr/1/4" inputs and xlr thru outputs · additional 1/8" stereo line input on channel 2 • pa6sr includes wireless receiver opt...
Page 12
9 the pa6s (powered hot spot) controls/indicators and their operation (front panel) speaker power led 3 band eq channel 1 level channel 2 level clip led compressor led ¼" preamp output handle mic boom mount power switch yoke bracket mount yoke bracket mount ac power input safety cable mount chan 2 1...
Page 13: Powered
Powered nano spot nspa the nspa is the result of years of research and development to make the smallest and loudest speaker for it's size by galaxy audio. The nspa has a 25-watt amplifier, with a universal power supply. That means this unit can be used anywhere in the world * as it will function on ...
Page 14
The nspa (powered nano spot) controls/indicators and their operation (front panel) power led signal presence indicator compressor led speaker 2 band eq level control yoke bracket mount yoke bracket mount 1/4" line input xlr balanced mic input safety cable mount power switch 1/8" line input -20 db pa...
Page 15: Stand Mounting Tip:
Mounting your nano spot (nspa), micro spot (ms5) or hot spot series speakers the micro spot (ms5), and the nano spot are supplied with a bracket kit that allows either stand or wall mounting. Wall mount options are available for the micro spot (ms5) and pa6s hs7 from any galaxy audio dealer, or onli...
Page 16: Wall/ceiling Mounting
Mic boom part: msb hs7 + pa6 yoke bracket part: sa-ybrf note: follow instructions included with optional pa6s/hs7 yoke bracket kit. Optional boom mount hardware part: mba wall/ceiling mounting galaxy audio yoke brackets can be used for permanently mounting hs7, pa6s and micro spot loudspeakers to wa...
Page 17: Secondary Support:
Are smaller than the core diameter of the screw. Always use fasteners in all mounting holes and avoid over tightening, as this can weaken the mounting surface, damage the fasteners, and make the installation much less secure. Secondary support: as we recommend the use of a secondary support for adde...
Page 18: Adjustment:
Note: check that any holes you drill and the fasteners will not interfere with any wiring, plumbing, etc. That may be behind the mounting surface. Pull speaker wires through the mounting surface and the feed thru the hole in the bracket. Secure the bracket base plate. Do not over tighten fasteners! ...
Page 19: Specifica
Specifica tions hot spot 7 ( hs 7) micro spot ( ms 5) 1- 5" driver (ceramic driver ss 5c160-16b) 14. 5 oz. (0.45 kg) 100 watts 88 db (1 khz octave band) 150 hz - 15 khz 16 ohms t wo 1/4 inch jacks wired in parallel 28.25 abs plastic 6.25"x 6"x 7.5" (159mm x 152.4mm x 191mm) 4 lbs. (2.74 kgs) volume ...
Page 20: Specifica
The galaxy audio s5n-8 and st 1.5 are ferro fluid cooled drivers. Specifica tions 170 w atts @ 4 ohms thd @ 4 ohms 4 ohms 80 hz - 18 khz three band center detent low : +/-12 db @ 200 hz mid : +/-12 db @ 2 khz high : +/-12 db @ 10 khz t wo 1/4" balanced/unbalanced t wo xlr 24v phantom pwr one 1/8" st...
Page 21
18 accessories and replacement parts mba - mic boom adaptor mounts to the top of the pa6s, pa6sr, or hs7. Allows mic boom to be mounted on top of the unit. Works with 3/8" & 1/2" mic booms. Sa-1 - spun aluminum stand adapter for mounting a hot spot series monitor on a microphone stand. Saybsa10 - mi...
Page 22
Fcc consumer alert for wireless microphones (u.S.) most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low...
Page 23
20
Page 24: Warranty
1-800-369-7768 www.Galaxyaudio.Com specifications in this manual are subject to change without notice. V20141208 © copyright galaxy audio 2014 warranty information can be viewed online at http://www.Galaxyaudio.Com/warranty.Php three year limited warranty hs7 (hot spot ® 7) , ms5 (micro spot tm 5) ,...