Galaxy GSKU User manual - page 4
Power input
The receiver requires 5V/2A DC power. Use the power
adaptor included in this package.
HDMI Video output
Network status indicator
-LED on: network connection established
-LED flashing: pairing mode
-LED off: connection failed or power failure
Video status indicator
-LED on: receiver has connected to display device
successfully
-LED off: video connection failed
IR receiver
USB port (reserved)
05
06
Installation for the WHDI stick and receiver is easy. For best signal
reception, it is recommended to place BOTH the WHDI Stick and
receiver vertically. You can use the bundled stand for the receiver,
and the bundled angled HDMI converter for the WHDI stick
respectively.
Installation
1) It is recommended to turn off your device before installing the
WHDI stick.
2) Connect the HDMI video input of the stick to the HDMI output
port of your HD video device. Use the angled HDMI converter or
the extension cable if necessary.
Installing the WHDI Stick
Galaxy WHDI Stick
USB cable
1
2
6
3
5
4
1
2
3
4
5
6
WHDI Receiver
3) Connect the USB port of the stick to the USB port of your HD
video device. Use the bundled USB power adaptor if your HD
video device does not equip with a USB port.