4070 subwoofer drawing title drawing title checked by checked by drawing no ap18039/1. Drawing no ap18039/1. Revisions & date revisions & date material 125gsm material 125gsm colour definition colour definition pantone black 100% pantone black 100% 1: 31/05/05 2: 3: 4: 5: 1: 31/05/05 2: 3: 4: 5: gal...
Introduction.................................................. Safety precautions......................................... Subwoofer controls....................................... Attaching feet to your subwoofer.................. Running in..................................................... Conn...
For safety reasons please read the following instructions and the enclosed important safety information carefully before attempting to connect your subwoofer unit to the mains. Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation ex...
Read instructions - all the safety and operating instructions should be read before the product is operated retain instructions - the safety and operating instructions should be retained for future reference. Heed warnings - all warnings on the product and the operating instructions should be adhere...
Alternatively, if this product is equipped with a three-wire grounding- type plug, a plug with a third (grounding) pin, it will only fit into a grounding-type power outlet. This is a safety feature. If the plug does not fit, contact your electrician to replace your obsolete outlet. Do not defeat the...
Left right left right power level min max frequency 50hz 150hz line in l r high level out high level in power rating: 230v ac 50hz max power consumption: 65w www.Gale.Co.Uk caution: avis: achtung: risk of electric shock do not open risque de choc electrique ne pas ouvrir vorm Öffnen des gerÄtes netz...
Subwoofer controls 7 7. High level input / high level output if your amplification system does not have a dedicated subwoofer line output, your subwoofer must be connected via the high level terminals on the rear panel. Connection should be made from the speaker terminals on your amplification syste...
Connecting via line input if your amplification system has a dedicated subwoofer line output then you should connect your 4070 via the line input on the rear panel using a good quality phono lead. Note that if your amplification system has a mono subwoofer line out then use the left/mono socket on y...
9 positioning your subwoofer the positioning of your subwoofer will affect the quantity and also quality of the lower frequencies of the system. Locating the subwoofer near a wall will increase the bass response of the speaker. If it is placed too near to a corner however, the overall effect may be ...
4070 technical specifications 40hz-150hz line in: 200mv (for max output) hi level in: 4v (for max output) 65 watts 230 volts 50 hz or 115 volts 50 hz usa/canada only 65 watts 8” unshielded long throw woofer continuous/active 300 x 300 x 300 11.8 x 11.8 x 11.8 14.5kg / 31.9 lbs black ash / maple freq...
11 this warranty does not cover cosmetic damage or damage due to acts of god, accident, misuse, abuse, negligence, commercial use, or modification of, or to any part of, the product. This warranty does not cover damage due to improper operation, maintenance or installation, or attempted repair by an...
Www.Gale.Co.Uk made from recyclable material part no. Ap180391 drawing title drawing title checked by checked by drawing no ap18039/1. Drawing no ap18039/1. Revisions & date revisions & date material 125gsm material 125gsm colour definition colour definition pantone black 100% pantone black 100% 1: ...
