Gallagher HR3 User Manual - page 10

10 

Lamp

Vibrator

The handle will vibrate upon Electronic ID recognition. This is a single vibration period 

whether the tag is duplicate or unique. 

The vibrator can be turned on and off, see the SmartReader HR

3 

Configurator Help.

Bluetooth enabled

The SmartReader is Bluetooth enabled.  This allows Electronic ID tag data to be 

wirelessly transmitted to a paired Bluetooth enabled device (e.g. Scale or other data 

logging devices).  This is turned on or off depending on operating mode, which is 

altered in the Configurator.  See the SmartReader HR

3

 Configurator Help. 

Lamp

The lamp (red) illuminates for the following reasons:

••  When the SmartReader scans for 

Electronic ID tags, the red lamp 

flashes on and off.

••  On a successful tag read. 

The lamp remains solid for an 

extended period.

Note: If a tag is not read within the 

read period the lamp stops flashing.

The timing of the lamp illumination can be altered, see the SmartReader HR

3 

Configurator Help.