Gallagher T11 Installation Note
Part Number: 3E2512 R1 |
1
Installation Note | Gallagher T12 Reader
Installation Note
Gallagher T12 Reader
The Gallagher T12 Reader
The Gallagher T12 Reader is a smart card proximity reader. It can be installed as
either an entry reader or exit reader. It can be mounted on any standard British
electrical flush box.
The reader can read Mifare DESFire EV1, Mifare Plus and Mifare Classic cards. The
Multi Tech variant can also read 125Khz cards.
The reader sends information to the Cardax FT Controller and acts upon information
sent from the Cardax FT Controller. The reader itself does not make any access
decisions.
The Gallagher T12 Reader uses the “Cardax IV Reader” communications protocol
to communicate with the Cardax FT Controller.
This equipment contains components that can be damaged by electrostatic
discharge. Ensure both you and the equipment are earthed before beginning
any servicing.