Gallet BOU 759O Instruction Manual - Description of The Controls

ENG - 19

ENG

Description of the controls

P1.  ON/Off switch

P2.  ON/OFF indicator light

P3.  Water level scale

P4.  Lid

P5.  Multi-directional base

Instructions for Use

before you start:

Before you use your new kettle for the first time, please, boil water and pour it away. 

1)  Unwind sufficient cord from the storage area to reach the power outlet. Then place the 

power base on a dry, flat surface. 

2)  Open the lid and fill the kettle with cold water. 

3)  Make sure that the water level is between the minimum and maximum marks on the water 

level scale. Do not switch on the kettle when empty. 

4)  Check and correct the filter’s position before boiling the water. The automatic shutt off switch 

may not work properly without the filter. 

5)  Close the lid and place the kettle back on the base. 

6)  Plug to AC outlet with the voltage corresponded to the information on the product label. 

7)  Switch the kettle on by the main switch. The indicator light will go on showing that the water 

is being boiled.   

8)  When the water has boiled, the kettle will switch off automatically. 

9)  Do not remove the kettle from the power base without first switching off. 

10) Remember if you wish to re-boil, put the main switch of the kettle to the “I = ON” position. 

11) The kettle may be switch off at any time by either pushing the main switch of the kettle to the 

“0 = OFF” position.