Gallet CCH 130 Instruction Manual - V. Troubleshooting
EN - 28
3) After 10-15 minutes of washing, stop the washing machine and let the blankets dry.
4) Make sure the blankets are dry and connect the detachable connector.
Notes:
- Make sure the washing machine is clean.
- The temperature of the water in the washing machine should be in the range of 25 °C -
40 °C. If the water temperature is higher, it will damage the body of the heating blankets.
Recommended temterature is 30 °C.
- Do not put any pins and sharp objects that could destroy the heating blankets to the
washing machine with the blankets.
- Do not operate the blanket if it is wet.
V. TROUBLESHOOTING
Error messages:
Shown on display
Problem
Solution
„P“
The controller connector is not
properly connected to the blanket
Check the connector
connection
„E“
Internal circuit of the blanket is
damaged
Contact the authorised
service centre
The device does not work
- Check whether the wall outlet is powered. You can use another electrical appliance to do
so.
- Make sure the power cord is not damaged.
VI. TECHNICAL DATA
Voltage (V)
shown on the type label of the appliance
Input (W)
shown on the type label of the appliance
Weight (kg) about
1,33
Protection class of the appliance
II.
Size of the product (mm)
130 x 160
nput in standby mode is < 1,00 W
Input in off mode is 0.00 W
VII. LEGISLATIVE & ECOLOGY
The manufacturer reserves the right to change the technical specifications and
accessories for the respective models.
WARNING: DO NOT USE THIS PRODUCT NEAR WATER, IN WET AREAS TO
AVOID FIRE OR INJURY OF ELECTRIC CURRENT. ALWAYS TURN OFF THE
PRODUCT WHEN YOU DON’T USE IT OR BEFORE A REVISION. THERE
AREN’T ANY PARTS IN THIS APPLIANCE WHICH ARE REPARABLE BY
CONSUMER. ALWAYS APPEAL TO A QUALIFIED AUTHORIZED SERVICE.
THE PRODUCT IS UNDER A DANGEROUS TENTION.