Gallet FMOE222B Instruction Manual - page 47
EN
EN - 47
TURNTABLE INSTALLATION
a)
Open the oven door and insert the turnable ring.
Put the glass tray on the top of the turntable ring, so that
the central point of the glass tray sits on the turntable
shaft at the bottom of the oven.
b)
Never place the glass tray upside down.
The glass tray should be restricted.
c)
Both glass tray and turntable ring assembly
must always be used during cooking,
d)
All food and containers of food are always
placed
on the glass tray for coking.
e)
If glass tray or turntable ring assembly cracks
or breaks, contact nearest autorized service center.
Instruction for Use
Installation
Take microwave oven out of the box. Remove all packing material and accessories empty
the inside of the oven. Examine the oven for any damage such as dents or broken door.
Do not install if oven is damaged.
Cabinet: Remove any protective film found on the microwave oven cabinet surface.
Do not remove the light brown Mica cover that is attached to the oven cavity to protect
the magnetron.
1) Select a level surface that provide enough open space for the intake and outlet vents.
2) minimum clearance of 20 cm is required between the oven and any
adjacent walls.
20cm
30cm
20cm
min85cm
0cm
3) - Leave a minimum clearance of 12 inches (30cm) above the oven.
- Do not remove the legs from the bottom of the oven.
- Blocking the intake and outlet openings can damage the oven.
- Place the oven as far away from radios and TV as possible.
Operation of microwave oven may cause interference to your radio or TV reception.
4) Plug your oven into a standard household outlet. Be sure the voltage and the frequency
is the same as the voltage and the frequency on the rating label.