Gallet SEC 816IW Instruction Manual - page 19
ENG
19
/ 26
18
III. INSTRUCTIONS FOR USE
Remove all packing material and take out the dryer with its accessories. Remove all possible
adhesion foils, stick-on labels or paper from the appliance. Lift off the handle
A2
to the operating
position so that its arrest is ensured. Plug the power cord
A4
to a socket. Put the adapter
B
on
the dryer.
Hair drying
For quick hair drying, turn the switch
A1
to the position of the maximum temperature. For drying
short hair or for finishing hair drying, set the switch to the lower positions. Direct the outgoing air
to hair while keeping the dryer handle in the distance of 10 to 15 cm from the head and move it
evenly. In drying with hot air flow, take out excessive humidity from hair using a brush or fingers.
If you have long hair, bend your head so that the hair falls down freely from the scalp and face.
After you have finished drying, cool down the dryer by turning the
A2
switch to the cool air
position and then turn the
A1
switch to the
0
position.
A
B
A2
A3
A4
A5
1
A1