Operating instructions 200mv.
Your new g-k vocal monitor represents the very latest advances technology has to offer. It was designed to give you full control of your voice over other voices and instruments in the monitor mix without affecting the mix or anyone else's monitors. With level, bass and treble controls for the auxili...
The direct outs provide balanced versions of the input signals, ch. 1 direct is ch. 1 x 1 and ch. 2 direct is ch. 2 input x 5. Neither output is affected by the level controls or the eq or the echo. However, ch. 1 direct is affected by the -10db pad. This allows a singer to listen to two tracks (via...
Power switch the power switch on the 200mv is located on the rear panel above the fuse holder. Power cord the power cord is detachable and plugs into a socket located on the rear panel. If a replacement cord is used or needed it should be ul rated at 10amp, 125v; or if using 240v, the cord should be...
Optional : you can add digital delay or other effects to mic and instrument by going from 'line out'. Into effect and back into aux. In. (note: this is not an in line effects loop so the return signal is simply added to the main signal.) 200mv mic stand bracket the 200mv is mic stand mountable for m...
Gallien-krueger • 2240 paragon dr. • san jose, ca 95131 us: (408) 441-7970 • fax (408) 441-8085 europe: 41.42.234520 • fax: 41.42.239525.
