Gallo STRADA 2 Owner's Manual - page 9
STEREO
Strada 2 can be connected directly to your amplifier
and used as stereo speakers.
•
Using speaker cables, connect the speaker output
on your amplifier to the terminals on the rear of
your Strada 2 loudspeakers.
Consult your amplifier owner’s guide for more
detailed set up instructions.
2.1
To further enhance the sound, a subwoofer can
be added to the system to play the lowest bass
frequencies.
•
Using speaker cables, connect the speaker
outputs on your amplifier to the high level
inputs on the subwoofer.
•
Run a second set of speaker cables from the
high level outputs on the subwoofer to your
loudspeakers.
•
On the subwoofer, adjust the crossover between
80Hz and 120Hz.
•
When music is playing, you can adjust the level
control to match the subwoofer and loudspeaker
volume.
Alternatively, if your amplifier has a pre-out, you
can wire the speakers directly to your amplifier and
connect the subwoofer to your amplifier using a
coaxial cable.
Consult your subwoofer owner’s guide for more
detailed set up instructions.
9