Summary of GT 250C
Page 1
Acquaer ltd. Www.Gamagarden.Eu h- 4900, fehérgyarmat, szatmári út 11. Gt 250c tiller instruction manual.
Page 2
Acquaer ltd. Www.Gamagarden.Eu h- 4900, fehérgyarmat, szatmári út 11. 1 table of contents technical data ............................................................................................................................................................................. 4 description ..........
Page 3
Acquaer ltd. Www.Gamagarden.Eu h- 4900, fehérgyarmat, szatmári út 11. 2 congratulations on your purchase of a gama garden petrol tiller! Safety instructions read these instructions carefully and familiarize yourself with the controls on the machine and how they are used and the applicable safety ins...
Page 4
Acquaer ltd. Www.Gamagarden.Eu h- 4900, fehérgyarmat, szatmári út 11. 3 warning symbols description of the symbols found on the machine. Read these instructions before use. Keep your hands and feet away from moving parts – risk of serious personal injury and/or death. Risk of personal injury and/or ...
Page 5
Acquaer ltd. Www.Gamagarden.Eu h- 4900, fehérgyarmat, szatmári út 11. 4 technical data type gt 250c basic (rato) gt 250c basic (honda) engine type rato rv225 4-stroke vertical engine gcv 160 4-stroke vertical engine fuel petrol petrol output 5,5 hp 4,4 hp displacement 223 cm³ 160 cm³ fuel tank capac...
Page 6
Acquaer ltd. Www.Gamagarden.Eu h- 4900, fehérgyarmat, szatmári út 11. 5 description 1 crossbar 10 wheel 2 rubber grip 11 side disc 3 clutch lever 12 rotating blade attachment 4 upper handle 13 gearbox 5 clutch cable 14 protective guard 6 handle tube 15 engine 7 handle holder 16 throttle cable 8 loop...
Page 7
Acquaer ltd. Www.Gamagarden.Eu h- 4900, fehérgyarmat, szatmári út 11. 6 assembly warning: make sure not to damage the clutch cable when unpacking. Assemble the machine as shown in the diagrams in these instructions. 1. Remove all parts from the packaging. 2. Unpack the top handle, handle tube, handl...
Page 8
Acquaer ltd. Www.Gamagarden.Eu h- 4900, fehérgyarmat, szatmári út 11. 7 assembly of the handle 1. Loosen the 4 screws m8 x 25 from the handle tube (pos. 1, fig. 3) and align the holes in the handle tube with the holes in the support plate. 2. Secure using 4 screws m8 x 25, 4 nuts m8, 4 washers Ø 8 a...
Page 9
Acquaer ltd. Www.Gamagarden.Eu h- 4900, fehérgyarmat, szatmári út 11. 8 fit the right-hand guard extension in the same way. Warning: never use the machine without the guards fitted. Assembly of the rotating blades fit the rotating blades with screws m8 x 25, lock washers Ø 8 and nuts m8 (fig. 7). Th...
Page 10
Acquaer ltd. Www.Gamagarden.Eu h- 4900, fehérgyarmat, szatmári út 11. 9 assembly of the engine on the machine (see the transport section) assembling the clutch cable the clutch cable is fitted at the factory. Clutch adjustment the clutch cable is adjusted at the factory. Any clutch cable adjustment ...
Page 11
Acquaer ltd. Www.Gamagarden.Eu h- 4900, fehérgyarmat, szatmári út 11. 10 • smoking is forbidden. • do not start the machine if fuel has been spilled. Move the machine away from any fuel spill before starting. Exercise care to ensure spilt fuel does not ignite. • in order to avoid a fire hazard, remo...
Page 12
Acquaer ltd. Www.Gamagarden.Eu h- 4900, fehérgyarmat, szatmári út 11. 11 • only use the machine in daylight, or in good artificial lighting. Do not cultivate ground where there are large stones, or where there are mounds of earth or ditches. Danger: fire hazard! Avoid sources of ignition, e.G. Smoki...
Page 13
Acquaer ltd. Www.Gamagarden.Eu h- 4900, fehérgyarmat, szatmári út 11. 12 surface working reduce the cultivating depth to work the surface. Working on slopes danger: risk of personal injury and/or material damage if the machine rolls over. • be very careful when changing direction, and when on slopes...
Page 14
Acquaer ltd. Www.Gamagarden.Eu h- 4900, fehérgyarmat, szatmári út 11. 13 assembly of the engine 1. A lign the clutch’s mount ring (pos. 2, fig. 13) with the guide pin on the gearbox’s mount ring (pos. 3, fig. 13). 2. Press down the engine and clutch so that the clutch’s mount ring and (pos. 2, fig. ...
Page 15
Acquaer ltd. Www.Gamagarden.Eu h- 4900, fehérgyarmat, szatmári út 11. 14 maintenance follow these maintenance instructions for the best performance and service life. Carry out maintenance after the specified calendar period or specified hours of operation (whichever comes first). In demanding condit...
Page 16
Acquaer ltd. Www.Gamagarden.Eu h- 4900, fehérgyarmat, szatmári út 11. 15 warning: never rinse the machine, especially not the gearbox, with a water jet or high pressure washer. Changing the oil note: drain the engine oil when the engine is hot so that all the oil quickly runs out. 1. Unscrew and rem...
Page 17
Acquaer ltd. Www.Gamagarden.Eu h- 4900, fehérgyarmat, szatmári út 11. 16 check the spark plug check that the spark plug is clean and free of combustion residue and has the right electrode gap. The correct electrode gap is 0.7-0.8 mm. 1. Disconnect the spark plug lead from the spark plug and unscrew ...
Page 18
Acquaer ltd. Www.Gamagarden.Eu h- 4900, fehérgyarmat, szatmári út 11. 17 3. Assemble the new rotating blades by following the instructions in the reverse order..
Page 19
Acquaer ltd. Www.Gamagarden.Eu h- 4900, fehérgyarmat, szatmári út 11. 18 4. Note: side discs (pos. 1, fig. 16) should be disassembled and assembled the same way. Gearbox maintenance warning: do not tilt the gearbox and do not put it on the side or upside down. Gearbox oil should be changed every yea...
Page 20
Acquaer ltd. Www.Gamagarden.Eu h- 4900, fehérgyarmat, szatmári út 11. 19 • unscrew the spark plug and pour a tablespoon of fresh engine oil into the cylinder through the spark plug hole. Pull the starter cord slowly several times to distribute the oil in the engine. Replace the spark plug, but do no...
Page 21
Acquaer ltd. Www.Gamagarden.Eu h- 4900, fehérgyarmat, szatmári út 11. 20 - deployment of the device solely for private use. The guarantee is reduced to 6 months in the commercial sector or leasing business. - proper handling and observance of all information given in the operating manual, which form...