1. DL manuals
  2. GAMA
  3. Paint Sprayer
  4. Master Series
  5. Service Manual

GAMA Master Series Service Manual

Summary of Master Series

  • Page 1

    Service manual spray gun series master 1.5 issue 7/18/2013 ref. Nr-00008-eng before installing the master gun and starting it up, carefully read all the technical and safety documentation included in this manual. Pay special attention to the information to know and understand the operation and the c...

  • Page 2

    Service manual 2/20 1.5 issue ref. Nr-00008-eng http://www.Gamapur.Com garraf maquinaria, s. A. (hereinafter “gama”) provides this limited warranty (hereinafter “warranty”) to the original purchaser (hereinafter “customer”) covering this equipment and the original gama manufactured accessories deliv...

  • Page 3: Important Safety Information

    Service manual 3/20 1.5 issue ref. Nr-00008-eng http://www.Gamapur.Com this chapter contains important information on the safety, handling and use of your gama master series gun. Before installing the master gun and starting it up, carefully read all the technical and safety documentation included i...

  • Page 4

    Service manual 4/20 1.5 issue ref. Nr-00008-eng http://www.Gamapur.Com when working with the gun, it is recommended that the operator wear suitable clothing and elements of personal protection, including, without limitation, gloves, protective goggles, safety footwear and face masks. Use breathing e...

  • Page 5

    Service manual 5/20 1.5 issue ref. Nr-00008-eng http://www.Gamapur.Com * internal mixture due to high pressure * automatic cleaning with pressurized air * no solvents needed * mechanical spraying * exterior lubrication of the mix chamber approximate weight: 1 kg / 2.2 lbs dimensions: h 19 cm / w 10 ...

  • Page 6

    Service manual 6/20 1.5 issue ref. Nr-00008-eng http://www.Gamapur.Com for better knowledge of the elements forming the master series gun, the main components and their description are shown. For more precise identification, see the components manual ref. Nr-00004-eng 1. Gun block unit 2. Polyol inp...

  • Page 7

    Service manual 7/20 1.5 issue ref. Nr-00008-eng http://www.Gamapur.Com precaution: when working with the gun or performing maintenance work on it, wear suitable protection in accordance with the recommendations and specifications provided by the product suppliers. Gama provides a series of tools and...

  • Page 8

    Service manual 8/20 1.5 issue ref. Nr-00008-eng http://www.Gamapur.Com 11. Press the safety stop and turn it counter clockwise to set it to the spray position 12. Perform a test projection in a vessel. Warning: before performing maintenance, repair or cleaning work, press the safety stop and turn it...

  • Page 9

    Service manual 9/20 1.5 issue ref. Nr-00008-eng http://www.Gamapur.Com 1. Perform the unit shutdown procedures, following the method indicated in the machine service manual. 2. Close the manual valves of each product by turning them to the full clockwise position. 3. To eliminate the pressure from t...

  • Page 10

    Service manual 10/20 1.5 issue ref. Nr-00008-eng http://www.Gamapur.Com to obtain maximum output from your master gun, it is necessary to periodically perform certain maintenance operations. To prevent possible injury caused by incorrect handling of the raw materials and solvents used in the process...

  • Page 11

    Service manual 11/20 1.5 issue ref. Nr-00008-eng http://www.Gamapur.Com gun block unit and mix chamber warning: before proceeding to carry out maintenance work on the gun, make sure that the unit is at a complete standstill, that all the buttons and the general switch are turned off and that the uni...

  • Page 12: Side Block Unit

    Service manual 12/20 1.5 issue ref. Nr-00008-eng http://www.Gamapur.Com side block unit warning: before performing maintenance work on the gun, make sure that the unit is at a complete standstill, that all of the buttons and the main switch are turned off and that the unit is disconnected from the m...

  • Page 13

    Service manual 13/20 1.5 issue ref. Nr-00008-eng http://www.Gamapur.Com reassemble the check valve and side seal assembly. In the model with a metal seal, you must fit the spring and the check valve into the retainer. To facilitate assembly, use a little grease to fit the o-ring in the metal seal ca...

  • Page 14: Trigger And Valve

    Service manual 14/20 1.5 issue ref. Nr-00008-eng http://www.Gamapur.Com trigger and valve warning: before performing maintenance work on the gun, make sure that the unit is at a complete standstill, that all of the buttons and the main switch are turned off and that the unit is disconnected from the...

  • Page 15

    Service manual 15/20 1.5 issue ref. Nr-00008-eng http://www.Gamapur.Com verify that the accommodation of the trigger shaft is free of dirt and wall light a small fat layer in his interior. Mount the air hose in the rear part of the gun using sealing paste in the thread to avoid air escapes. Insert t...

  • Page 16

    Service manual 16/20 1.5 issue ref. Nr-00008-eng http://www.Gamapur.Com cylinder block and safety stop warning: before performing maintenance work on the gun, make sure that the unit is at a complete standstill, that all of the buttons and the main switch are turned off and that the unit is disconne...

  • Page 17

    Service manual 17/20 1.5 issue ref. Nr-00008-eng http://www.Gamapur.Com warning: to assure that the end cap is well-fitted, make sure that the retention ring is perfectly fitted in the fixing groove. To avoid possible errors in assembly, avoid approaching the cylinder block when applying pressure to...

  • Page 18: Pneumatic Cylinder

    Service manual 18/20 1.5 issue ref. Nr-00008-eng http://www.Gamapur.Com pneumatic cylinder warning: before performing maintenance work on the gun, make sure that the unit is at a complete standstill, that all of the buttons and the main switch are turned off and that the unit is disconnected from th...

  • Page 19

    Service manual 19/20 1.5 issue ref. Nr-00008-eng http://www.Gamapur.Com warning: to warranty that the cylinder block is well-fitted, make sure that the retention ring is perfectly fitted in the fixing groove. To avoid possible errors in assembly, avoid approaching the end cap when applying pressure ...

  • Page 20

    Service manual 20/20 1.5 issue ref. Nr-00008-eng http://www.Gamapur.Com warranty _____________________________________________________ 2 safety and handling ____________________________________________ 3 important safety information __________________________________________________ 3 characteristic...