GAMA RF120V1PRDC Instruction Manual
GAMA Electronics, Inc.
P.O. Box 1488 Crystal Lake, IL 60039
TEL: (815) 356-9600
FAX: (815) 356-9603
WEB: www.gamainc.com
E-MAIL: gama@gamainc.com
RF Receiver Model RF120V1PRDC Instruction Manual
Overview
.
The RF120V1PRDC is an RF receiver operating at a fixed frequency of 340 MHz. The receiver operates from 120VAC
input power and provides a polarity reversing output for use with certain AC powered winches. Winch suppliers such as
Harbor Freight and Northern Tool offer winches that operate from a 120 VAC power source which is rectified to operate a
DC motor. Below is a list of the manufacturers and the corresponding winch model numbers that the RF120V1PRDC
remote control will operate with:
Harbor Freight, Chicago Electric Winch Model 96127, 1,500 Pound.
Northern Tool, WARN Winch Model 80010, 1,000 Pound.
Northern Tool, WARN Winch Model 85330, 1,500 Pound.
Northern Tool, Dutton Lainson Model 25046, 4,000 Pound.
Northern Tool, Dutton Lainson Model SA5015AC, 1,200 Pound.
Northern Tool, Dutton Lainson Model SA9015AC, 2,700 Pound.
Northern Tool, Superwinch Model AC1500, 1,500 Pound.
Northern Tool, Superwinch Model AC1,000, 1,000 Pound.
Keeper Winch, Model KAC1500, 1,500 Pound.
Northern Tool, Model 54129, 1,500 Pound.
Each transmitter has a unique address that is transmitted when a button is pressed. A "program" button is provided on the
receiver to program the transmitter(s) address into the receiver's memory. An LED on the receiver indicates the receiver's
programming status and illuminates when the receiver is energized. The receiver is encased in a waterproof enclosure. The
operating range is at least 100 feet.
Polarity reversing output
:
The transmitter has two buttons assigned to the motor output. The up (^) button runs the motor in one direction and down
(v) button runs the motor in the opposite direction. A toggle switch is mounted on the receiver and provides manual control
of the output in case the transmitter is not available.
Light Output:
The light output is activated using the “Light Symbol” switch on the transmitter. Press the light switch once to latch this
output on. Press the light switch again to turn the light output off.
Maximum ratings:
Power for the receiver can be in the range of 100 to 132VAC. The relay contacts are rated at 20 Amperes, 1HP. Operating
temperature range - 0
o
F to 160
o
F.
Dimensions:
Receiver dimensions are approximately 5.75" L x 4" W x 2.5" H.