Solar lamp post with motion sensor us patent # 7172307 instruction manual models: gs-94s-pir gs-94fpw-pir gs-94s-pir gs-94fpw-pir.
Introduction thank you for your purchase. Gama sonic® solar charged accent lighting eliminates the problems associated with most solar lighting available today. Gama sonic® solar charged lights are brighter and last all night with a typical solar charge. Unique design, superior light output and nume...
Tools that are needed but not supplied with the high post solar lamp set are: a screw driver a wrench an electrical drill (this will be used to anchor the lamp base to the ground) solar lamp post location for optimum light duration throughout the night, it is very important to mount your solar lamp ...
Assembly instructions note: the following steps are for reference only. Consult your local hardware store for the best installation method for your particular surface. Note : the solar light must be charged in the on position for two sunny days for best results. Gs-94ns-pir 1. Use an electric drill ...
Fig. 5 gs-94fpw-pir pier mount 1. Use an electric drill to make two holes in the desired surface. Place provided anchors (d) into holes, place the base (b) in line with the holes and screw the provided screws (c). 2. Screw part (a) into part (b) and turn the on/off switch in the lamp head (a) to on ...
Warning : do not dispose of li-ion battery in the regular trash, municipal waste stream or by fire as batteries may leak or explode. Do not open, short circuit, or mutilate batteries as injury may occur. Preserve our environment by recycling li-ion batteries or disposing of them in accordance with l...
