Gamber Johnson 7160-0250 Installation Instructions

Summary of 7160-0250

  • Page 1

    1 / 5 7160-0252 led light assembly 7160-0250 notepad™v universal cradle 7160-0250-01 notepad™v universal cradle w/tall side clips 7160-0250-02 notepad™v universal cradle w/zero edge side clips 7160-0251 screen support assembly 7160-0253 mic clip assembly notepad™v - universal cradle & accessories re...

  • Page 2

    2 / 5 rear support assembly two rear support clips must be assembled at the time of installation. Attach each support bracket to tee nut located in channel on back edge of notepad™v using a #8-32 x .38 socket head screw. Attach the rear clip to the support bracket with a #8 external tooth washer and...

  • Page 3

    3 / 5 adjusting notepad™v for computer pull to open deck unlock and turn lock body optional vinyl caps adjustment screw if the latch on notepad™v is locked, unlock the unit with the supplied keys. All notepad™v's are keyed alike. Unlatch by turning the lock body clockwise 90 degrees. Loosen adjustme...

  • Page 4

    4 / 5 notepad™v accessories screen support assemblies 7160-0253 mic clip assembly #8-32 x .62 socket head screws & #8 flat washers screen support assembly #8-32 x .62 socket head screws & #8 flat washers #6-32 x .25 phillips flat head screws the 7160-0251 screen support assembly can only be attached...

  • Page 5

    5 / 5 #8-32 x .62 socket head screws & #8 flat washers led light assembly the led light assembly can be mounted on any corner of the notepad™ v cradle. Remove the two phillips flat head screws found on the corner. Place the led light assembly over the holes and attach using two #8-32 x .62 socket he...